CS Instrument Vietnam, Danh Sách Sản PhẩmCS Instrument Vietnam

  CHART RECORDER -- Cảm biến khí gas có hiển thị         
4-13 Intelligent chart recorder for compressed air and gases Measurement - control - indication - alarm - recording - evaluation  DS 500 + Accessories CS-instrument/CSInstrument/CS Instrument  
14-25 Intelligent mobile chart recorder
Energy analysis - consumption measurement - leakage calculation at compressed air systems 
DS 500 mobile
+ Accessories
CS-instrument/CSInstrument/CS Instrument  
18-25 Affordable mobile chart recorder, Energy analysis - flow measurement - leckage calculation at compressed air systems DS 400 mobile CS-instrument/CSInstrument/CS Instrument  
26 Mobile current/effective power meter suitable for DS 500/ DS 400 mobile CS PM 600 CS-instrument/CSInstrument/CS Instrument  
27 CS ENERIUM 30 Current/effective power meter
 for panel mounting
CS ENERIUM 30 CS-instrument/CSInstrument/CS Instrument  
28-34 Hand-held instrument e.g. for flow measurement  PI 500 CS-instrument/CSInstrument/CS Instrument  
  HUMIDITY/DEW POINT MEASUREMENT - cảm biến độ ẩm/ điểm sương   CS-instrument/CSInstrument/CS Instrument  
40-45 Portable dew point meter for relative humidity,
temperature, dew point measurement 
DP 500 / DP 510 CS-instrument/CSInstrument/CS Instrument  
46-47 Portable dew point meter with integrated pressure sensor DP 400 mobile CS-instrument/CSInstrument/CS Instrument  
50-51 Dew point sensor for membrane and desiccant driers  FA 510/515
DS 52-Set
CS-instrument/CSInstrument/CS Instrument  
52-53 Dew point sensor for refrigeration driers  FA 510/515
DS 52-Set
CS-instrument/CSInstrument/CS Instrument  
54-59 Dew point set for compressed air and gases DS 400 CS-instrument/CSInstrument/CS Instrument  
60-61 Dew point measurement for refrigeration,
membrane and desiccant dryers 
FA 500 CS-instrument/CSInstrument/CS Instrument  
62 Dew point measurement in explosive areas FA 515 Ex CS-instrument/CSInstrument/CS Instrument  
62 Accessories mains units   CS-instrument/CSInstrument/CS Instrument  
63-64 Accessories for dew point measurement and calibration   CS-instrument/CSInstrument/CS Instrument  
FLOW/CONSUMPTION MEASUREMENT - Máy đo lưu lượng khí/ gas   CS-instrument/CSInstrument/CS Instrument  
69-80 Precise flow measurement for compressed air and gases
for heavy duty industrial applications
VA 550/570 (ATEX) CS-instrument/CSInstrument/CS Instrument  
81-89 Flow sensors for compressed air and gases VA 500/520 CS-instrument/CSInstrument/CS Instrument  
90-97 Flow station for compressed air and gases DS 400 CS-instrument/CSInstrument/CS Instrument  
98-99 Flow direction switch for compressed air systems VA 409 CS-instrument/CSInstrument/CS Instrument  
100 Useful accessories: Measuring sections, Drilling jig   CS-instrument/CSInstrument/CS Instrument  
101 Useful accessories: Spot drilling collars, thickness meter   CS-instrument/CSInstrument/CS Instrument  
103 Calibration of flow sensors   CS-instrument/CSInstrument/CS Instrument  
             
             
     
Cata-
log-
ue
page
Description Device    
  Compressed air quality according to ISO 8573 - Cảm biến đo lường khí nén theo tiêu chuẩn ISO  
108-113 Compressed air quality measurement
according to ISO 8573
OIL-Check/PC 400  CS-instrument/CSInstrument/CS Instrument  
  LEAKAGE MEASUREMENT - Cảm biến đo rò rỉ khí    
114-117 Leak detector with camera LD 500 / 510 CS-instrument/CSInstrument/CS Instrument  
118-119 Leak detector for compressed air systems LD 400 CS-instrument/CSInstrument/CS Instrument  
  PRESSURE MEASUREMENT - Cảm biến đo áp suất    
120-121 Differential Pressure Sensor 1.6 bar diff Differential pressure
sensor
CS-instrument/CSInstrument/CS Instrument  
  DIGITAL DISPLAYS - Cảm biến hiển thị số (dạng gắn cố định)    
122-123 Digital displays for wall or panel mounting DS51 / DS52 CS-instrument/CSInstrument/CS Instrument  
   Calibration - Dịch vụ hiệu chuẩn    
64 Calibration services for dew point, relative humidity   CS-instrument/CSInstrument/CS Instrument  
103 Calibration services for flow sensors   CS-instrument/CSInstrument/CS Instrument  
  Re-calibration and service   CS-instrument/CSInstrument/CS Instrument  
  Products not included in the catalogue: sản phẩm không nằm trong danh mục catalogue CS-instrument/CSInstrument/CS Instrument  
  FA 540 dew point sensor with same pinning at M12 plugas FA 410 FA 540  CS-instrument/CSInstrument/CS Instrument  
  FA 545 dew point sensor with same pinning at M12 plugas FA 415 FA 545 CS-instrument/CSInstrument/CS Instrument  
  Terms & Conditions   CS-instrument/CSInstrument/CS Instrument  
             
             
             
             
       
  DS 500 - Intelligent chart recorder - Bộ hiển thị & lưu trữ dữ liệu      
Catalogue page 8   Order no. CS-instrument/CSInstrument/CS Instrument  
DS 500 - intelligent chart recorder in basic version (4 sensor inputs) 0500 5000 CS-instrument/CSInstrument/CS Instrument  
Option 4 additional sensor inputs for DS 500 Z500 5001 CS-instrument/CSInstrument/CS Instrument  
Option 8 additional sensor inputs for DS 500 Z500 5002 CS-instrument/CSInstrument/CS Instrument  
Option Integrated webserver Z500 5003 CS-instrument/CSInstrument/CS Instrument  
Option "consumption report" statistics, daily/weekly/monthly report Z500 5004 CS-instrument/CSInstrument/CS Instrument  
Option version for panel mounting Z500 5006 CS-instrument/CSInstrument/CS Instrument  
Option power supply 24VDC (instead of 100...240 VAC) Z500 5007 CS-instrument/CSInstrument/CS Instrument  
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels,
(mathematical functions: addition, subtraction, division, multiplication)
Z500 5008 CS-instrument/CSInstrument/CS Instrument  
Option: "Totalizer function for analogue signals" Z500 5009 CS-instrument/CSInstrument/CS Instrument  
External Gateway PROFIBUS for RS 485 interface connection Z500 3008 CS-instrument/CSInstrument/CS Instrument  
External Gateway PROFINET for RS 485 interface connection     Z500 3009 CS-instrument/CSInstrument/CS Instrument  
Software: - Phần mềm   CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040 CS-instrument/CSInstrument/CS Instrument  
CS Soft Network - Database Client/Server Solution (up to 5 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software
0554 7041 CS-instrument/CSInstrument/CS Instrument  
CS Soft Network - Database Client/Server Solution (up to 10 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software
0554 7042 CS-instrument/CSInstrument/CS Instrument  
CS Soft Network - Database Client/Server Solution (up to 20 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software
0554 7043 CS-instrument/CSInstrument/CS Instrument  
CS Soft Network - Database Client/Server Solution (> 20 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software
0554 7044 CS-instrument/CSInstrument/CS Instrument  
Software Support / h 9999 9998  CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 500 - cảm biến dòng (dành cho khí/ gas)   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 9   Order no. CS-instrument/CSInstrument/CS Instrument  
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) 0695 5001 CS-instrument/CSInstrument/CS Instrument  
Max. Version (185 m/s) Z695 5003 CS-instrument/CSInstrument/CS Instrument  
HighSpeed version (224 m/s) Z695 5002 CS-instrument/CSInstrument/CS Instrument  
Display Z695 5000 CS-instrument/CSInstrument/CS Instrument  
M-Bus (pulse output not available) Z695 5004 CS-instrument/CSInstrument/CS Instrument  
Sensor length 120 mm ZSL 0120 CS-instrument/CSInstrument/CS Instrument  
Sensor length 160 mm ZSL 0160 CS-instrument/CSInstrument/CS Instrument  
Sensor length 220 mm ZSL 0220 CS-instrument/CSInstrument/CS Instrument  
Sensor length 300 mm ZSL 0300 CS-instrument/CSInstrument/CS Instrument  
Sensor length 400 mm ZSL 0400 CS-instrument/CSInstrument/CS Instrument  
Sensor length 500 mm ZSL 0500 CS-instrument/CSInstrument/CS Instrument  
Sensor length 600 mm ZSL 0600 CS-instrument/CSInstrument/CS Instrument  
Sensor length 700 mm ZSL 0700 CS-instrument/CSInstrument/CS Instrument  
Ball valve I/I G 1/2" stainless steel 3300 0002 CS-instrument/CSInstrument/CS Instrument  
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006 CS-instrument/CSInstrument/CS Instrument  
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007 CS-instrument/CSInstrument/CS Instrument  
M12 – T plug for VA 500/520 to connect several sensors 020000823 CS-instrument/CSInstrument/CS Instrument  
9 Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010 CS-instrument/CSInstrument/CS Instrument  
Oil and fat free, special cleaning   0699 4005 CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration of new instrument with ISO certificate 3200 0001 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration 3200 0015 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for mixed gases on request CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 520 with integrated measuring section - Cảm biến dòng khí gas phiên bản tích hợp chức năng đo dòng   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 9   Order no. CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Option signal output / bus connection    CS-instrument/CSInstrument/CS Instrument  
M-Bus (pulse output not available) Z695 5004 CS-instrument/CSInstrument/CS Instrument  
Connection cables:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease 3200 0010 CS-instrument/CSInstrument/CS Instrument  
Option: special cleaning 0699 4005 CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration with ISO certificate  3200 0001 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration 3200 0015 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for mixed gases on request CS-instrument/CSInstrument/CS Instrument  
Further accessories:   CS-instrument/CSInstrument/CS Instrument  
Closing cap for measuring section in aluminium 0190 0001 CS-instrument/CSInstrument/CS Instrument  
Closing cap for measuring section stainless steel 1.4404 0190 0002 CS-instrument/CSInstrument/CS Instrument  
M12 – T plug for VA 500/520 to connect several sensors 020000823 CS-instrument/CSInstrument/CS Instrument  
  Flow measurment VA 500/ VA 520 for below gases - Cảm biến dòng khí cho dòng khí lưu lượng thấp   CS-instrument/CSInstrument/CS Instrument  
    Order no. CS-instrument/CSInstrument/CS Instrument  
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request CS-instrument/CSInstrument/CS Instrument  
  Dew point sensors FA 510 - cảm biến điểm sương CS-instrument/CSInstrument/CS Instrument  
9   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2
for quick-lock coupling
0699 3390 CS-instrument/CSInstrument/CS Instrument  
More measuring chambers please see on catalogue page 60   CS-instrument/CSInstrument/CS Instrument  
  Connection cables for VA/FA sensors - Cáp kết nối CS-instrument/CSInstrument/CS Instrument  
    Order no. CS-instrument/CSInstrument/CS Instrument  
  Connection cable for VA/FA, 5 m with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m with M12 plug 0553 0105 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 20 m with M12 plug 0553 0120 CS-instrument/CSInstrument/CS Instrument  
  Pressure sensors - cảm biến áp suất       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 9   Order no. CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356 CS-instrument/CSInstrument/CS Instrument  
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS (0..0.6 bar) accuracy ± 0.5 % 0694 3549 CS-instrument/CSInstrument/CS Instrument  
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request CS-instrument/CSInstrument/CS Instrument  
  Temperature sensors - cảm biến nhiệt độ       CS-instrument/CSInstrument/CS Instrument  
9   Order no. CS-instrument/CSInstrument/CS Instrument  
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201 CS-instrument/CSInstrument/CS Instrument  
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing
(82x55x33 mm), temperature range: -50°C to +80°C
0604 0203 CS-instrument/CSInstrument/CS Instrument  
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm),
temperature range: -50°C to +80°C
0604 0204 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207 CS-instrument/CSInstrument/CS Instrument  
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for pressure/temperature sensors   CS-instrument/CSInstrument/CS Instrument  
9   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 5 m, with open ends 0553 0108 CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 10 m, with open ends 0553 0109 CS-instrument/CSInstrument/CS Instrument  
  Clamp-on meters - Máy đo khí dạng gắn ngoài     CS-instrument/CSInstrument/CS Instrument  
9   Order no. CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends 0554 0510 CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends 0554 0518 CS-instrument/CSInstrument/CS Instrument  
Calibration certificate for clamp-on ammeters, 5 calibration points  0554 3333 CS-instrument/CSInstrument/CS Instrument  
  CS ENERIUM 30 Current/effective power meter for panel mounting - Đo dòng điện dạng gắn panel   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 10   Order no. CS-instrument/CSInstrument/CS Instrument  
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 Interface
0554 5355 CS-instrument/CSInstrument/CS Instrument  
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344  CS-instrument/CSInstrument/CS Instrument  
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345 CS-instrument/CSInstrument/CS Instrument  
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346 CS-instrument/CSInstrument/CS Instrument  
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347 CS-instrument/CSInstrument/CS Instrument  
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348 CS-instrument/CSInstrument/CS Instrument  
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349  CS-instrument/CSInstrument/CS Instrument  
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cable CS ENERIUM 30: Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 5 m, with open ends 0553 0108 CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 10 m, with open ends 0553 0109 CS-instrument/CSInstrument/CS Instrument  
Connection cable variable length, open ends on both sides 0553 0126 CS-instrument/CSInstrument/CS Instrument  
  DS 500 mobile - intelligent chart recorder CS-instrument/CSInstrument/CS Instrument  
Catalogue page 15   Order no. CS-instrument/CSInstrument/CS Instrument  
Intelligent chart recorder DS 500 mobile, 4 sensor inputs 0500 5012 CS-instrument/CSInstrument/CS Instrument  
Intelligent chart recorder DS 500 mobile, 8 sensor inputs 0500 5013 CS-instrument/CSInstrument/CS Instrument  
Intelligent chart recorder DS 500 mobile, 12 sensor inputs 0500 5014 CS-instrument/CSInstrument/CS Instrument  
Option “integrated Webserver” Z500 5003 CS-instrument/CSInstrument/CS Instrument  
Option “consumption report” statistics, daily/weekly/monthly report Z500 5004 CS-instrument/CSInstrument/CS Instrument  
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels,
(mathematical functions: addition, subtraction, division, multiplication)
Z500 5008 CS-instrument/CSInstrument/CS Instrument  
Option: "Totalizer function for analogue signals" Z500 5009 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Software:   CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040 CS-instrument/CSInstrument/CS Instrument  
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations 0554 7050 CS-instrument/CSInstrument/CS Instrument  
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer 0554 7045 CS-instrument/CSInstrument/CS Instrument  
GSM module for data transfer via the GSM network (mobile network) on request CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cables:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m 0553 0501  CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m 0553 0502 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m 0553 1503 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m 0553 0503 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments,ODU / ODU, 10 m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m 0553 0506 CS-instrument/CSInstrument/CS Instrument  
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0111
(for VA/FA sensors) from DS 300 mobile to DS 500 mobile
0553 0507 CS-instrument/CSInstrument/CS Instrument  
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0110
(for analogue) from DS 300 mobile to DS 500 mobile
0553 0508 CS-instrument/CSInstrument/CS Instrument  
Mounted Odu plug for connection on mobile instruments Z604 0104 CS-instrument/CSInstrument/CS Instrument  
Case for all sensors (dimensions: 500 x 360 x 180 mm) 0554 6006 CS-instrument/CSInstrument/CS Instrument  
  Flow sensors VA 500 - Cảm biến dòng khí gas     CS-instrument/CSInstrument/CS Instrument  
Catalogue page 24   Order no. CS-instrument/CSInstrument/CS Instrument  
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl.
5 m cable to mobile instruments
0695 1124 CS-instrument/CSInstrument/CS Instrument  
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm
incl. 5 m cable to mobile instruments
0695 1125 CS-instrument/CSInstrument/CS Instrument  
Sensor length 120 mm ZSL 0120 CS-instrument/CSInstrument/CS Instrument  
Sensor length  160 mm ZSL 0160 CS-instrument/CSInstrument/CS Instrument  
Sensor length  220 mm ZSL 0220 CS-instrument/CSInstrument/CS Instrument  
Sensor length  300 mm ZSL 0300 CS-instrument/CSInstrument/CS Instrument  
Sensor length  400 mm ZSL 0400 CS-instrument/CSInstrument/CS Instrument  
Sensor length  500 mm ZSL 0500 CS-instrument/CSInstrument/CS Instrument  
Sensor length  600 mm ZSL 0600 CS-instrument/CSInstrument/CS Instrument  
Sensor length  700 mm ZSL 0700 CS-instrument/CSInstrument/CS Instrument  
Ball valve I/I G 1/2" stainless steel 3300 0002 CS-instrument/CSInstrument/CS Instrument  
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006 CS-instrument/CSInstrument/CS Instrument  
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007 CS-instrument/CSInstrument/CS Instrument  
M12 – T plug for VA 500/520 to connect several sensors 020000823 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010 CS-instrument/CSInstrument/CS Instrument  
Oil and fat free, special cleaning   0699 4005 CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration with ISO certificate  3200 0001 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration   3200 0015 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for mixed gases on request CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 520 with integrated measuring section
Cảm biến dòng khí VA 520 + chức năng đo lưu lượng khí tích hợp
  CS-instrument/CSInstrument/CS Instrument  
24 Order no. CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525 CS-instrument/CSInstrument/CS Instrument  
  Flow measurment VA 500/ VA 520 for below gases - Cảm biến dòng khí cho dòng khí lưu lượng thấp   CS-instrument/CSInstrument/CS Instrument  
  Order no. CS-instrument/CSInstrument/CS Instrument  
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request CS-instrument/CSInstrument/CS Instrument  
  Dew point sensors FA 510 - cảm biến điểm sương   CS-instrument/CSInstrument/CS Instrument  
24   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1510 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1512 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for VA/FA sensors - Cáp kết nối   CS-instrument/CSInstrument/CS Instrument  
24   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
  Calibration certificates for flow sensors / dew point sensors - Chứng chỉ hiệu chuẩn cho cảm biến dòng khí và điểm sương   CS-instrument/CSInstrument/CS Instrument  
24 Order no. CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration for consumption sensors including ISO certificate 3200 0001 CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
  Pressure sensors - cả biến áp suất khí       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 24   Order no. CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356 CS-instrument/CSInstrument/CS Instrument  
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS (0..0.6 bar) accuracy ± 0.5 % 0694 3549 CS-instrument/CSInstrument/CS Instrument  
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request CS-instrument/CSInstrument/CS Instrument  
  Temperature sensors - cảm biến nhiệt độ       CS-instrument/CSInstrument/CS Instrument  
25   Order no. CS-instrument/CSInstrument/CS Instrument  
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm,
d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments
0604 0200 CS-instrument/CSInstrument/CS Instrument  
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201 CS-instrument/CSInstrument/CS Instrument  
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments 0604 0202 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207 CS-instrument/CSInstrument/CS Instrument  
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for pressure/temperature sensors - cáp kết nối  CS-instrument/CSInstrument/CS Instrument  
25   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501  CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature, or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
Mounted Odu plug for connection on mobile instruments Z604 0104 CS-instrument/CSInstrument/CS Instrument  
  Clamp-on meters - Máy đo khí dạng gắn ngoài   CS-instrument/CSInstrument/CS Instrument  
25   Order no. CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin 0554 0511 CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC,
3 m connection cable with ODU-plug (8 poles) for mobile devices
0554 0519 CS-instrument/CSInstrument/CS Instrument  
Calibration certificate for clamp-on ammeters, 5 calibration points 0554 3333 CS-instrument/CSInstrument/CS Instrument  
  Current/effective power meter up to 32 A   CS-instrument/CSInstrument/CS Instrument  
    Order no. CS-instrument/CSInstrument/CS Instrument  
CS PM 532   CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 32 A in a carrying case 0554 5340 CS-instrument/CSInstrument/CS Instrument  
  CS PM 600 Current/effective power meter - Máy đo dòng    CS-instrument/CSInstrument/CS Instrument  
26   Order no. CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m 0554 5341 CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m 0554 5342 CS-instrument/CSInstrument/CS Instrument  
Current transformer 100A/1A consisting of 3 transformers for mobile devices Z554 0001 CS-instrument/CSInstrument/CS Instrument  
Current transformer 600A/1A consisting of 3 transformers for mobile devices Z554 0002 CS-instrument/CSInstrument/CS Instrument  
Current transformer 1000A/1A consisting of 3 transformers for mobile devices Z554 0003 CS-instrument/CSInstrument/CS Instrument  
  CS ENERIUM 30 Current/effective power meter for panel mounting   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 27   Order no. CS-instrument/CSInstrument/CS Instrument  
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 Interface
0554 5355 CS-instrument/CSInstrument/CS Instrument  
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344  CS-instrument/CSInstrument/CS Instrument  
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345 CS-instrument/CSInstrument/CS Instrument  
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346 CS-instrument/CSInstrument/CS Instrument  
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347 CS-instrument/CSInstrument/CS Instrument  
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348 CS-instrument/CSInstrument/CS Instrument  
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349  CS-instrument/CSInstrument/CS Instrument  
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cable CS ENERIUM 30:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 5 m, with open ends 0553 0501  CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 10 m, with open ends 0553 0502 CS-instrument/CSInstrument/CS Instrument  
  Mobile chart recorder DS 400 mobile   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 20   Order no. CS-instrument/CSInstrument/CS Instrument  
Product Sensor input 1+2 Sensor input 3+4   CS-instrument/CSInstrument/CS Instrument  
DS 400 mobile - mobile chart recorder with graphic display and touch screen Digital  ---------- 0500 4012 D CS-instrument/CSInstrument/CS Instrument  
Digital Digital 0500 4012 DD CS-instrument/CSInstrument/CS Instrument  
Digital Analogue 0500 4012 DA CS-instrument/CSInstrument/CS Instrument  
Analogue  ---------- 0500 4012 A CS-instrument/CSInstrument/CS Instrument  
Analogue Analogue 0500 4012 AA CS-instrument/CSInstrument/CS Instrument  
Options:   CS-instrument/CSInstrument/CS Instrument  
Integrated Ethernet- and RS 485 interface Z500 4004 CS-instrument/CSInstrument/CS Instrument  
Integrated webserver Z500 4005 CS-instrument/CSInstrument/CS Instrument  
"Mathematics calculation function" for 4 freely selectable channels,
(virtual channels): addition, subtraction, division, multiplication
Z500 4007 CS-instrument/CSInstrument/CS Instrument  
"Totalizer function for analogue signals" Z500 4006 CS-instrument/CSInstrument/CS Instrument  
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...)     Z500 4001 CS-instrument/CSInstrument/CS Instrument  
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003 CS-instrument/CSInstrument/CS Instrument  
Further Accessories:   CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040 CS-instrument/CSInstrument/CS Instrument  
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations 0554 7050 CS-instrument/CSInstrument/CS Instrument  
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer 0554 7045 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m 0553 1503 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m 0553 0503 CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m 0553 0501 CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m 0553 0502 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments,ODU / ODU, 10 m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m 0553 0506 CS-instrument/CSInstrument/CS Instrument  
Case for all sensors (Dimensions: 500 x 360 x 120 mm) 0554 6006 CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 500 - cảm biến dòng (dành cho khí/ gas)       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 24   Order no. CS-instrument/CSInstrument/CS Instrument  
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl.
5 m cable to mobile instruments
0695 1124 CS-instrument/CSInstrument/CS Instrument  
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm
incl. 5 m cable to mobile instruments
0695 1125 CS-instrument/CSInstrument/CS Instrument  
Sensor length 120 mm ZSL 0120 CS-instrument/CSInstrument/CS Instrument  
Sensor length  160 mm ZSL 0160 CS-instrument/CSInstrument/CS Instrument  
Sensor length  220 mm ZSL 0220 CS-instrument/CSInstrument/CS Instrument  
Sensor length  300 mm ZSL 0300 CS-instrument/CSInstrument/CS Instrument  
Sensor length  400 mm ZSL 0400 CS-instrument/CSInstrument/CS Instrument  
Sensor length  500 mm ZSL 0500 CS-instrument/CSInstrument/CS Instrument  
Sensor length  600 mm ZSL 0600 CS-instrument/CSInstrument/CS Instrument  
Sensor length  700 mm ZSL 0700 CS-instrument/CSInstrument/CS Instrument  
Ball valve I/I G 1/2" stainless steel 3300 0002 CS-instrument/CSInstrument/CS Instrument  
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006 CS-instrument/CSInstrument/CS Instrument  
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007 CS-instrument/CSInstrument/CS Instrument  
M12 – T plug for VA 500/520 to connect several sensors 020000823 CS-instrument/CSInstrument/CS Instrument  
  Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010 CS-instrument/CSInstrument/CS Instrument  
Oil and fat free, special cleaning   0699 4005 CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration with ISO certificate  3200 0001 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration   3200 0015 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for mixed gases on request CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 520 with integrated measuring section   CS-instrument/CSInstrument/CS Instrument  
24   Order no. CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525 CS-instrument/CSInstrument/CS Instrument  
  Flow measurment VA 500/ VA 520 for below gases - Cảm biến dòng khí cho dòng khí lưu lượng thấp      
  Order no. CS-instrument/CSInstrument/CS Instrument  
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request CS-instrument/CSInstrument/CS Instrument  
  Dew point sensors FA 510 - cảm biến điểm sương      
24   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1510 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1512 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for VA/FA sensors- cáp kết nối   CS-instrument/CSInstrument/CS Instrument  
24   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
  Calibration certificates for flow sensors / dew point sensors - Chứng chỉ hiệu chuẩn cho cảm biến dòng khí và điểm sương      
24 Order no. CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration for consumption sensors including ISO certificate 3200 0001 CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
  Pressure sensors - cảm biến áp suất          
Catalogue page 24   Order no. CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356 CS-instrument/CSInstrument/CS Instrument  
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553 CS-instrument/CSInstrument/CS Instrument  
  Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549 CS-instrument/CSInstrument/CS Instrument  
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request CS-instrument/CSInstrument/CS Instrument  
  Temperature sensors - cảm biến nhiệt độ          
25   Order no. CS-instrument/CSInstrument/CS Instrument  
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm,
d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments
0604 0200 CS-instrument/CSInstrument/CS Instrument  
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201 CS-instrument/CSInstrument/CS Instrument  
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments 0604 0202 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207 CS-instrument/CSInstrument/CS Instrument  
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for pressure/temperature sensors - cáp kết nối       
25   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501  CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature, or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
Mounted Odu plug for connection on mobile instruments Z604 0104 CS-instrument/CSInstrument/CS Instrument  
  Clamp-on meters - Máy đo khí dạng gắn ngoài      
25   Order no. CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin 0554 0511 CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC,
3 m connection cable with ODU-plug (8 poles) for mobile devices
0554 0519 CS-instrument/CSInstrument/CS Instrument  
Calibration certificate for clamp-on ammeters, 5 calibration points 0554 3333 CS-instrument/CSInstrument/CS Instrument  
  Current/effective power meter up to 32 A      
    Order no. CS-instrument/CSInstrument/CS Instrument  
CS PM 532   CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 32 A in a carrying case 0554 5340 CS-instrument/CSInstrument/CS Instrument  
  CS PM 600 Current/effective power meter      
26   Order no. CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m 0554 5341 CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m 0554 5342 CS-instrument/CSInstrument/CS Instrument  
Current transformer 100A/1A consisting of 3 transformers for mobile devices Z554 0001 CS-instrument/CSInstrument/CS Instrument  
Current transformer 600A/1A consisting of 3 transformers for mobile devices Z554 0002 CS-instrument/CSInstrument/CS Instrument  
Current transformer 1000A/1A consisting of 3 transformers for mobile devices Z554 0003 CS-instrument/CSInstrument/CS Instrument  
  CS ENERIUM 30Current/effective power meter for panel mounting      
Catalogue page 27   Order no. CS-instrument/CSInstrument/CS Instrument  
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 Interface
0554 5355 CS-instrument/CSInstrument/CS Instrument  
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344  CS-instrument/CSInstrument/CS Instrument  
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345 CS-instrument/CSInstrument/CS Instrument  
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346 CS-instrument/CSInstrument/CS Instrument  
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347 CS-instrument/CSInstrument/CS Instrument  
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348 CS-instrument/CSInstrument/CS Instrument  
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349  CS-instrument/CSInstrument/CS Instrument  
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cable CS ENERIUM 30:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 5 m, with open ends 0553 0501  CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 10 m, with open ends 0553 0502 CS-instrument/CSInstrument/CS Instrument  
  Portable Hand-held instrument PI 500 - Máy đo khí dạng cầm tay CS-instrument/CSInstrument/CS Instrument  
30   Order no. CS-instrument/CSInstrument/CS Instrument  
PI 500 portable measuring instrument with integrated data logger, incl. power supply 0560 0511 CS-instrument/CSInstrument/CS Instrument  
Option for PI 500: “mathematics calculat. function” for 4 freely selectable "virtual" channels Z500 5107 CS-instrument/CSInstrument/CS Instrument  
Option for PI 500: "Totalizer function for analogue signals" Z500 5106 CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040 CS-instrument/CSInstrument/CS Instrument  
Transportation case 0554 6510 CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 500 - cảm biến dòng (dành cho khí/ gas)       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 31   Order no. CS-instrument/CSInstrument/CS Instrument  
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl.
5 m cable to mobile instruments
0695 1124 CS-instrument/CSInstrument/CS Instrument  
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm
incl. 5 m cable to mobile instruments
0695 1125 CS-instrument/CSInstrument/CS Instrument  
Sensor length 120 mm ZSL 0120 CS-instrument/CSInstrument/CS Instrument  
Sensor length  160 mm ZSL 0160 CS-instrument/CSInstrument/CS Instrument  
Sensor length  220 mm ZSL 0220 CS-instrument/CSInstrument/CS Instrument  
Sensor length  300 mm ZSL 0300 CS-instrument/CSInstrument/CS Instrument  
Sensor length  400 mm ZSL 0400 CS-instrument/CSInstrument/CS Instrument  
Sensor length  500 mm ZSL 0500 CS-instrument/CSInstrument/CS Instrument  
Sensor length  600 mm ZSL 0600 CS-instrument/CSInstrument/CS Instrument  
Sensor length  700 mm ZSL 0700 CS-instrument/CSInstrument/CS Instrument  
Ball valve I/I G 1/2" stainless steel 3300 0002 CS-instrument/CSInstrument/CS Instrument  
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006 CS-instrument/CSInstrument/CS Instrument  
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007 CS-instrument/CSInstrument/CS Instrument  
M12 – T plug for VA 500/520 to connect several sensors 020000823 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010 CS-instrument/CSInstrument/CS Instrument  
Oil and fat free, special cleaning   0699 4005 CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration with ISO certificate  3200 0001 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration   3200 0015 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for mixed gases on request CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 520 with integrated measuring section - Cảm biến dòng khí gas phiên bản tích hợp chức năng đo dòng   CS-instrument/CSInstrument/CS Instrument  
31 Order no. CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525 CS-instrument/CSInstrument/CS Instrument  
  Flow measurment VA 500/ VA 520 for below gases - Cảm biến dòng khí cho dòng khí lưu lượng thấp      
  Order no. CS-instrument/CSInstrument/CS Instrument  
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request CS-instrument/CSInstrument/CS Instrument  
  Dew point sensors FA 510 - cảm biến điểm sương      
31   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1510 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1512 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for VA/FA sensors - cáp kết nối        
31   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
  Calibration certificates for flow sensors / dew point sensors      
31   Order no. CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration for consumption sensors including ISO certificate 3200 0001 CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
  Pressure sensors - cảm biến áp suất       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 31   Order no. CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356 CS-instrument/CSInstrument/CS Instrument  
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549 CS-instrument/CSInstrument/CS Instrument  
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request CS-instrument/CSInstrument/CS Instrument  
  Temperature sensors -cảm biến nhiệt độ khí gas    
31   Order no. CS-instrument/CSInstrument/CS Instrument  
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm,
d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments
0604 0200 CS-instrument/CSInstrument/CS Instrument  
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201 CS-instrument/CSInstrument/CS Instrument  
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments 0604 0202 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207 CS-instrument/CSInstrument/CS Instrument  
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208 CS-instrument/CSInstrument/CS Instrument  
  Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for pressure/temperature sensors- cáp kết nối      
32   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501  CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature, or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
Mounted Odu plug for connection on mobile instruments Z604 0104 CS-instrument/CSInstrument/CS Instrument  
  Clamp-on meters - Máy đo khí dạng gắn ngoài      
32   Order no. CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin 0554 0511 CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC,
3 m connection cable with ODU-plug (8 poles) for mobile devices
0554 0519 CS-instrument/CSInstrument/CS Instrument  
Calibration certificate for clamp-on ammeters, 5 calibration points 0554 3333 CS-instrument/CSInstrument/CS Instrument  
  Current/effective power meter up to 32 A          
    Order no. CS-instrument/CSInstrument/CS Instrument  
CS PM 532   CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 32 A in a carrying case 0554 5340 CS-instrument/CSInstrument/CS Instrument  
  CS PM 600 Current/effective power meter - máy đo dòng       
32   Order no. CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m 0554 5341 CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m 0554 5342 CS-instrument/CSInstrument/CS Instrument  
Current transformer 100A/1A consisting of 3 transformers for mobile devices Z554 0001 CS-instrument/CSInstrument/CS Instrument  
Current transformer 600A/1A consisting of 3 transformers for mobile devices Z554 0002 CS-instrument/CSInstrument/CS Instrument  
Current transformer 1000A/1A consisting of 3 transformers for mobile devices Z554 0003 CS-instrument/CSInstrument/CS Instrument  
  Portable dew point meter DP 500       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 41   Order no. CS-instrument/CSInstrument/CS Instrument  
Set DP 500 in a case - consisting of: 0600 0500 CS-instrument/CSInstrument/CS Instrument  
Portable dew point meter DP 500 for compressed air and gases 0560 0500 CS-instrument/CSInstrument/CS Instrument  
Mobile measuring chamber up to 16 bar 0699 4490 CS-instrument/CSInstrument/CS Instrument  
Diffusion-tight teflon hose 1 m with fast coupling at both ends 0554 0003 CS-instrument/CSInstrument/CS Instrument  
Power supply for DP 500/510 0554 0009 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 11.3% RH 0554 0002 CS-instrument/CSInstrument/CS Instrument  
Quick-lock coupling 0530 1101 CS-instrument/CSInstrument/CS Instrument  
Dry container for CS dew point sensors 0699 2500 CS-instrument/CSInstrument/CS Instrument  
Transportation case (small) for DP 500 0554 6500 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Further options, not included in the set - Lựa chọn thêm   CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040 CS-instrument/CSInstrument/CS Instrument  
Portable dew point meter DP 500 (high pressure version up to 350 bar) 0560 0501 CS-instrument/CSInstrument/CS Instrument  
High-pressure measuring chamber up to 350 bar 0699 3590 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for atmospheric dew point 0699 3690 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for granulate dryers for minimum over pressure 0699 3490 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 33 % RH 0554 0004 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 75.3 % RH 0554 0005 CS-instrument/CSInstrument/CS Instrument  
Additional calibration point freely selectable in the range between -80…+20°Ctd 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
  Portable dew point meter DP 510 with external sensor input - cảm biến điểm sương dạng cầm tay - tích hợp thêm cảm biến đầu vào   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 44   Order no. CS-instrument/CSInstrument/CS Instrument  
Set DP 510 in a case - consisting of: 0600 0510 CS-instrument/CSInstrument/CS Instrument  
Portable dew point meter DP 510 with one additional sensor input 0560 0510 CS-instrument/CSInstrument/CS Instrument  
Mobile measuring chamber up to 16 bar 0699 4490 CS-instrument/CSInstrument/CS Instrument  
Diffusion-tight teflon hose 1 m with fast coupling at both ends 0554 0003 CS-instrument/CSInstrument/CS Instrument  
Power supply for DP 500/510 0554 0009 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 11.3% RH 0554 0002 CS-instrument/CSInstrument/CS Instrument  
Quick-lock coupling 0530 1101 CS-instrument/CSInstrument/CS Instrument  
Dry container for CS dew point sensors 0699 2500 CS-instrument/CSInstrument/CS Instrument  
Transportation case (big) for DP 510 as well as further sensors 0554 6510 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Further options, not included in the set - Lựa chọn thêm   CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet 0554 7040 CS-instrument/CSInstrument/CS Instrument  
Option for DP 510: “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 5107 CS-instrument/CSInstrument/CS Instrument  
Option for DP 510: "Totalizer function for analogue signals" Z500 5106 CS-instrument/CSInstrument/CS Instrument  
Portable dew point meter DP 510 for compressed air and gases
(high pressure version up to 350 bar)
0560 0512 CS-instrument/CSInstrument/CS Instrument  
High-pressure measuring chamber up to 350 bar 0699 3590 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for atmospheric dew point 0699 3690 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for granulate dryers for minimum over pressure 0699 3490 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 33 % RH 0554 0004 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 75.3 % RH 0554 0005 CS-instrument/CSInstrument/CS Instrument  
Additional calibration point freely selectable in the range between -80…+20°Ctd 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
Mounted Odu plug for connection on mobile instruments Z604 0104 CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 500 - cảm biến dòng (dành cho khí/ gas)      
Catalogue page 45   Order no. CS-instrument/CSInstrument/CS Instrument  
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl.
5 m cable to mobile instruments
0695 1124 CS-instrument/CSInstrument/CS Instrument  
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm
incl. 5 m cable to mobile instruments
0695 1125 CS-instrument/CSInstrument/CS Instrument  
Sensor length 120 mm ZSL 0120 CS-instrument/CSInstrument/CS Instrument  
Sensor length  160 mm ZSL 0160 CS-instrument/CSInstrument/CS Instrument  
Sensor length  220 mm ZSL 0220 CS-instrument/CSInstrument/CS Instrument  
Sensor length  300 mm ZSL 0300 CS-instrument/CSInstrument/CS Instrument  
Sensor length  400 mm ZSL 0400 CS-instrument/CSInstrument/CS Instrument  
Sensor length  500 mm ZSL 0500 CS-instrument/CSInstrument/CS Instrument  
Sensor length  600 mm ZSL 0600 CS-instrument/CSInstrument/CS Instrument  
Sensor length  700 mm ZSL 0700 CS-instrument/CSInstrument/CS Instrument  
Ball valve I/I G 1/2" stainless steel 3300 0002 CS-instrument/CSInstrument/CS Instrument  
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006 CS-instrument/CSInstrument/CS Instrument  
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007 CS-instrument/CSInstrument/CS Instrument  
M12 – T plug for VA 500/520 to connect several sensors 020000823 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010 CS-instrument/CSInstrument/CS Instrument  
Oil and fat free, special cleaning   0699 4005 CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration with ISO certificate  3200 0001 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration   3200 0015 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for mixed gases on request CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 520 with integrated measuring section - Cảm biến dòng khí gas phiên bản tích hợp chức năng đo dòng      
45 Order no.    
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525 CS-instrument/CSInstrument/CS Instrument  
  Flow measurment VA 500/ VA 520 for below gases   CS-instrument/CSInstrument/CS Instrument  
    Order no. CS-instrument/CSInstrument/CS Instrument  
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request CS-instrument/CSInstrument/CS Instrument  
  Dew point sensors FA 510      
45   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1510 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd
incl. mobile measuring chamber, 5 m cable and perforated cap
0699 1512 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for VA/FA sensors      
45   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
  Calibration certificates for flow sensors / dew point sensors      
45   Order no. CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration for consumption sensors including ISO certificate 3200 0001 CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
  Pressure sensors - cảm biến áp suất          
Catalogue page 45   Order no. CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356 CS-instrument/CSInstrument/CS Instrument  
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549 CS-instrument/CSInstrument/CS Instrument  
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request CS-instrument/CSInstrument/CS Instrument  
  Temperature sensors - cảm biến nhiệt độ khí gas      
45   Order no. CS-instrument/CSInstrument/CS Instrument  
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm,
d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments
0604 0200 CS-instrument/CSInstrument/CS Instrument  
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201 CS-instrument/CSInstrument/CS Instrument  
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments 0604 0202 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207 CS-instrument/CSInstrument/CS Instrument  
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for pressure/temperature sensors - cáp kết nối     
45   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501  CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature, or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
Mounted Odu plug for connection on mobile instruments Z604 0104 CS-instrument/CSInstrument/CS Instrument  
  Clamp-on meters - Máy đo khí dạng gắn ngoài      
45   Order no. CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin 0554 0511 CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC,
3 m connection cable with ODU-plug (8 poles) for mobile devices
0554 0519 CS-instrument/CSInstrument/CS Instrument  
Calibration certificate for clamp-on ammeters, 5 calibration points 0554 3333 CS-instrument/CSInstrument/CS Instrument  
  Current/effective power meter up to 32 A      
    Order no. CS-instrument/CSInstrument/CS Instrument  
CS PM 532   CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 32 A in a carrying case 0554 5340 CS-instrument/CSInstrument/CS Instrument  
  CS PM 600 Current/effective power meter - máy đo dòng       
45   Order no. CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m 0554 5341 CS-instrument/CSInstrument/CS Instrument  
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m 0554 5342 CS-instrument/CSInstrument/CS Instrument  
Current transformer 100A/1A consisting of 3 transformers for mobile devices Z554 0001 CS-instrument/CSInstrument/CS Instrument  
Current transformer 600A/1A consisting of 3 transformers for mobile devices Z554 0002 CS-instrument/CSInstrument/CS Instrument  
Current transformer 1000A/1A consisting of 3 transformers for mobile devices Z554 0003 CS-instrument/CSInstrument/CS Instrument  
  DP 400 mobile with integrated dew point and pressure measurement - Máy đo dòng di động có tích hợp cảm biến điểm sương và áp suất      
Catalogue page 47   Order no. CS-instrument/CSInstrument/CS Instrument  
DP 400 mobile - Portable dew point meter with integrated pressure measurement,
incl. transportation bag for teflon hose and power supply
0500 4505 CS-instrument/CSInstrument/CS Instrument  
Options:   CS-instrument/CSInstrument/CS Instrument  
Option: Integrated data logger for 100 million measured values Z500 4002 CS-instrument/CSInstrument/CS Instrument  
Option: Integrated Ethernet- and RS 485 interface Z500 4004 CS-instrument/CSInstrument/CS Instrument  
Option: Integrated webserver Z500 4005 CS-instrument/CSInstrument/CS Instrument  
Option: “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 4007 CS-instrument/CSInstrument/CS Instrument  
Option: 2 additional sensor inputs for external sensors
(1 x digital sensor Modbus, 1 x analogue sensor)
Z500 4001 CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040 CS-instrument/CSInstrument/CS Instrument  
Connection cables:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m 0553 1503 CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501 CS-instrument/CSInstrument/CS Instrument  
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502 CS-instrument/CSInstrument/CS Instrument  
Extension cable for mobile instruments ODU/ODU, 10m 0553 0504 CS-instrument/CSInstrument/CS Instrument  
  Dew point sensors FA 510/515 for desiccant driers - cảm biến điểm sương    CS-instrument/CSInstrument/CS Instrument  
Catalogue page 50   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for desiccant driers  incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510 CS-instrument/CSInstrument/CS Instrument  
FA 515 dew point sensor for desiccat driers incl. inspection certificate, 4…20 mA output signal (2-wire connection) or Modbus-RTU interface 0699 0515 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Additional costs FA 510, FA 515 dew point sensors: lựa chọn thêm cho cảm biến điêm sương   CS-instrument/CSInstrument/CS Instrument  
Measuring ranges:   CS-instrument/CSInstrument/CS Instrument  
 -80…+20°Ctd (-112 to 68°F)   CS-instrument/CSInstrument/CS Instrument  
 -80...+20°Ctd (output scaling 4...20 mA = -100…+20°Ctd)   CS-instrument/CSInstrument/CS Instrument  
 -80…+20°Ctd (output scaling 4…20 mA = -110…+20°Ctd)   CS-instrument/CSInstrument/CS Instrument  
Analogue output:   CS-instrument/CSInstrument/CS Instrument  
4…20 mA (3-Draht)   CS-instrument/CSInstrument/CS Instrument  
Special version 2…10 Volt Z699 0510 CS-instrument/CSInstrument/CS Instrument  
Scaling:   CS-instrument/CSInstrument/CS Instrument  
Standard   CS-instrument/CSInstrument/CS Instrument  
Special scaling: 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514 CS-instrument/CSInstrument/CS Instrument  
Connector plug:   CS-instrument/CSInstrument/CS Instrument  
M12 plug   CS-instrument/CSInstrument/CS Instrument  
M12 plug (90°) angled   CS-instrument/CSInstrument/CS Instrument  
Max. pressure:   CS-instrument/CSInstrument/CS Instrument  
50 bar   CS-instrument/CSInstrument/CS Instrument  
350 bar  Z699 0515 CS-instrument/CSInstrument/CS Instrument  
Surface condition:   CS-instrument/CSInstrument/CS Instrument  
Normal   CS-instrument/CSInstrument/CS Instrument  
Free of oil & grease Z699 0517 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cables:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m with M12 plug 0553 0105 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 20 m with M12 plug 0553 0120 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA sensors, 5 m with 90° offset  M12 plug 0553 0118 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA sensors, 10 m with 90° offset  M12 plug 0553 0119 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m shielded 0553 0129 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m shielded 0553 0130 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Measuring chambers:   CS-instrument/CSInstrument/CS Instrument  
Standard measuring chamber up to 16 bar 0699 3390 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for atmospheric dew point 0699 3690 CS-instrument/CSInstrument/CS Instrument  
High pressure measuring chamber up to 350 bar 0699 3590 CS-instrument/CSInstrument/CS Instrument  
Measuring Chamber for granulate dryers up to 250 mbar 0699 3490 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290 CS-instrument/CSInstrument/CS Instrument  
Quick-lock coupling  NW 7,2 sealing tape 0530 1101 CS-instrument/CSInstrument/CS Instrument  
50 CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Mains units:   CS-instrument/CSInstrument/CS Instrument  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110 CS-instrument/CSInstrument/CS Instrument  
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail 0699 3340 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Calibration and adjustment:   CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Replacement unit for the period of re-calibration 0699 3900 CS-instrument/CSInstrument/CS Instrument  
Dew point meter in exchange with calibration certificate at -40° Ctd 0699 3990 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 11.3% RH 0554 0002 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 33 % RH 0554 0004 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 75,3 % RH 0554 0005 CS-instrument/CSInstrument/CS Instrument  
  Dew point set DS 52 for desiccant driers      
Catalogue page 51   Order no. CS-instrument/CSInstrument/CS Instrument  
Dew point set DS 52 for desiccant driers  0600 5100 CS-instrument/CSInstrument/CS Instrument  
consisting of:   CS-instrument/CSInstrument/CS Instrument  
DS 52 LED display in wall housing 0500 0009 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for desiccant driers  incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510 CS-instrument/CSInstrument/CS Instrument  
Standard measuring chamber up to 16 bar 0699 3390 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Options:   CS-instrument/CSInstrument/CS Instrument  
Power supply 24 VDC (instead of 230 VAC) Z500 0001 CS-instrument/CSInstrument/CS Instrument  
Power supply 110 VAC (instead of 230 VAC) Z500 0002 CS-instrument/CSInstrument/CS Instrument  
Alarm unit mounted at wall housing Z500 0003 CS-instrument/CSInstrument/CS Instrument  
Alarm unit for external mounting with 5 m cable Z500 0004 CS-instrument/CSInstrument/CS Instrument  
Connecting cable version Switzerland - three-pole Z553.CH CS-instrument/CSInstrument/CS Instrument  
Connecting cable version USA - three-pole Z553.USA CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Calibration and adjustment:   CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 11.3% RH 0554 0002 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 33 % RH 0554 0004 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 75,3 % RH 0554 0005 CS-instrument/CSInstrument/CS Instrument  
  Dew point sensors FA 510/515 for refrigeration driers   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 52   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512 CS-instrument/CSInstrument/CS Instrument  
FA 515 dew point sensor for refrigeration driers incl. inspection certificate, 4…20 mA output signal (2-wire connection) or Modbus-RTU interface 0699 0517 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Additional costs FA 510, FA 515 dew point sensors:   CS-instrument/CSInstrument/CS Instrument  
Measuring ranges:   CS-instrument/CSInstrument/CS Instrument  
 -20…+50°Ctd (-4 to 122 °F)   CS-instrument/CSInstrument/CS Instrument  
 -40…+30°Ctd (-40 to 86°F) on request CS-instrument/CSInstrument/CS Instrument  
 -45…+70°Ctd (-49 to 158 °F) on request CS-instrument/CSInstrument/CS Instrument  
 -60…+30°Ctd (-76 to 86°F) on request CS-instrument/CSInstrument/CS Instrument  
Analogue output:   CS-instrument/CSInstrument/CS Instrument  
4…20 mA (3-Draht)   CS-instrument/CSInstrument/CS Instrument  
Special version 2…10 Volt Z699 0510 CS-instrument/CSInstrument/CS Instrument  
Scaling:   CS-instrument/CSInstrument/CS Instrument  
Standard   CS-instrument/CSInstrument/CS Instrument  
Special scaling: 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514 CS-instrument/CSInstrument/CS Instrument  
Connector plug:   CS-instrument/CSInstrument/CS Instrument  
M12 plug   CS-instrument/CSInstrument/CS Instrument  
M12 plug (90°) angled   CS-instrument/CSInstrument/CS Instrument  
Max. pressure:   CS-instrument/CSInstrument/CS Instrument  
50 bar   CS-instrument/CSInstrument/CS Instrument  
350 bar  Z699 0515 CS-instrument/CSInstrument/CS Instrument  
Surface condition:   CS-instrument/CSInstrument/CS Instrument  
Normal   CS-instrument/CSInstrument/CS Instrument  
Free of oil & grease Z699 0517 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cables:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m with M12 plug 0553 0105 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 20 m with M12 plug 0553 0120 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA sensors, 5 m with 90° offset  M12 plug 0553 0118 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA sensors, 10 m with 90° offset  M12 plug 0553 0119 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m shielded 0553 0129 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m shielded 0553 0130 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Measuring chambers:   CS-instrument/CSInstrument/CS Instrument  
Standard measuring chamber up to 16 bar 0699 3390 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for atmospheric dew point 0699 3690 CS-instrument/CSInstrument/CS Instrument  
High pressure measuring chamber up to 350 bar 0699 3590 CS-instrument/CSInstrument/CS Instrument  
Measuring Chamber for granulate dryers up to 250 mbar 0699 3490 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290 CS-instrument/CSInstrument/CS Instrument  
52 Quick-lock coupling  NW 7,2 sealing tape 0530 1101 CS-instrument/CSInstrument/CS Instrument  
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Mains units:   CS-instrument/CSInstrument/CS Instrument  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110 CS-instrument/CSInstrument/CS Instrument  
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail 0699 3340 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Calibration and adjustment:   CS-instrument/CSInstrument/CS Instrument  
Precision calibration at 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
Precision calibration in the range of -20 to 50°Ctd, one additional point, freely selectable 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Replacement unit for the period of re-calibration 0699 3900 CS-instrument/CSInstrument/CS Instrument  
Dew point meter in exchange with calibration certificate at -40° Ctd 0699 3990 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 11.3% RH 0554 0002 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 33 % RH 0554 0004 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 75,3 % RH 0554 0005 CS-instrument/CSInstrument/CS Instrument  
  Dew point set DS 52 for refrigeration driers      
Catalogue page 53   Order no. CS-instrument/CSInstrument/CS Instrument  
Dew point set DS 52 for refrigeration driers 0600 5120 CS-instrument/CSInstrument/CS Instrument  
consisting of:   CS-instrument/CSInstrument/CS Instrument  
DS 52 LED display in wall housing 0500 0009 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512 CS-instrument/CSInstrument/CS Instrument  
Standard measuring chamber up to 16 bar 0699 3390 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Options:   CS-instrument/CSInstrument/CS Instrument  
Power supply 24 VDC (instead of 230 VAC) Z500 0001 CS-instrument/CSInstrument/CS Instrument  
Power supply 110 VAC (instead of 230 VAC) Z500 0002 CS-instrument/CSInstrument/CS Instrument  
Alarm unit mounted at wall housing Z500 0003 CS-instrument/CSInstrument/CS Instrument  
Alarm unit for external mounting with 5 m cable Z500 0004 CS-instrument/CSInstrument/CS Instrument  
Connecting cable version Switzerland - three-pole Z553.CH CS-instrument/CSInstrument/CS Instrument  
Connecting cable version USA - three-pole Z553.USA CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Calibration and adjustment:   CS-instrument/CSInstrument/CS Instrument  
Precision calibration at 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
Precision calibration in the range of -20 to 50°Ctd, one additional point, freely selectable 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 11.3% RH 0554 0002 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 33 % RH 0554 0004 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 75,3 % RH 0554 0005 CS-instrument/CSInstrument/CS Instrument  
  Dew point set DS 400   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 54   Order no. CS-instrument/CSInstrument/CS Instrument  
Dew point set DS 400 for desiccant driers (-80…+20°Ctd) 0601 0510 CS-instrument/CSInstrument/CS Instrument  
consisting of:   CS-instrument/CSInstrument/CS Instrument  
Chart recorder DS 400 0500 4000 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for desiccant driers  incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface (-80…+20°Ctd) 0699 0510 CS-instrument/CSInstrument/CS Instrument  
Standard measuring chamber up to 16 bar 0699 3390 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Dew point set DS 400 for refrigeration driers (-20…+50°Ctd) 0601 0512 CS-instrument/CSInstrument/CS Instrument  
consisting of:   CS-instrument/CSInstrument/CS Instrument  
Chart recorder DS 400 0500 4000 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface (-20…+50°Ctd) 0699 0512 CS-instrument/CSInstrument/CS Instrument  
Standard measuring chamber up to 16 bar 0699 3390 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Optionen:   CS-instrument/CSInstrument/CS Instrument  
Integrated data logger for 100 million measured values Z500 4002 CS-instrument/CSInstrument/CS Instrument  
Integrierte Ethernet- und RS 485 Schnittstelle Z500 4004 CS-instrument/CSInstrument/CS Instrument  
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) Z500 4001 CS-instrument/CSInstrument/CS Instrument  
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003 CS-instrument/CSInstrument/CS Instrument  
Integrated Webserver Z500 4005 CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040 CS-instrument/CSInstrument/CS Instrument  
Alarm device assembled Z500 0003 CS-instrument/CSInstrument/CS Instrument  
Alarm device for external assembly incl. 5 m cable Z500 0004 CS-instrument/CSInstrument/CS Instrument  
Calibration and adjustment:   CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
  DS 400 - Chart recorder       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 56   Order no. CS-instrument/CSInstrument/CS Instrument  
Product sensor-
input 1+2
sensor-
input 3+4
  CS-instrument/CSInstrument/CS Instrument  
Chart recorder DS400 - with 3.5“ graphic display  - easy operation with touch screen digital  ---------- 0500 4000 D CS-instrument/CSInstrument/CS Instrument  
digital digital 0500 4000 DD CS-instrument/CSInstrument/CS Instrument  
digital analogue 0500 4000 DA CS-instrument/CSInstrument/CS Instrument  
analogue  ---------- 0500 4000 A CS-instrument/CSInstrument/CS Instrument  
analogue analogue 0500 4000 AA CS-instrument/CSInstrument/CS Instrument  
Options:   CS-instrument/CSInstrument/CS Instrument  
Integrated data logger for 100 Mio. measured values Z500 4002 CS-instrument/CSInstrument/CS Instrument  
Integrated Ethernet- and RS 485 interface Z500 4004 CS-instrument/CSInstrument/CS Instrument  
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) Z500 4001 CS-instrument/CSInstrument/CS Instrument  
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003 CS-instrument/CSInstrument/CS Instrument  
External Gateway PROFIBUS for RS 485 interface connection Z500 3008 CS-instrument/CSInstrument/CS Instrument  
External Gateway PROFINET for RS 485 interface connection Z500 3009 CS-instrument/CSInstrument/CS Instrument  
Option Integrated Webserver DS400 Z500 4005 CS-instrument/CSInstrument/CS Instrument  
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 4007 CS-instrument/CSInstrument/CS Instrument  
Option "Totalizer function for analogue signals" Z500 4006 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Further options:   CS-instrument/CSInstrument/CS Instrument  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040 CS-instrument/CSInstrument/CS Instrument  
CS Soft Network - Database Client/Server Solution (up to 5 DS 400) - database (MySQL) to Server - data evaluation via Client-Software 0554 7041 CS-instrument/CSInstrument/CS Instrument  
CS Soft Network - Database Client/Server Solution (up to 10 DS 400) - data base (MySQL) to server - data evaluation via Client-Software 0554 7042 CS-instrument/CSInstrument/CS Instrument  
CS Soft Network - Database Client/Server Solution (up to 20 DS 400) - data base (MySQL) to server - data evaluation via Client-Software 0554 7043 CS-instrument/CSInstrument/CS Instrument  
CS Soft Network - Database Client/Server Solution (> 20 DS 400) - data base (MySQL) to server - data evaluation via Client-Software 0554 7044 CS-instrument/CSInstrument/CS Instrument  
Software Support / h 9999 9998 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Ready for plug in and parametrization 0990 0010 CS-instrument/CSInstrument/CS Instrument  
Everything ready for plug in 0990 0011 CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 500       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 57   Order no. CS-instrument/CSInstrument/CS Instrument  
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) 0695 5001 CS-instrument/CSInstrument/CS Instrument  
Max. Version (185 m/s) Z695 5003 CS-instrument/CSInstrument/CS Instrument  
HighSpeed version (224 m/s) Z695 5002 CS-instrument/CSInstrument/CS Instrument  
Display Z695 5000 CS-instrument/CSInstrument/CS Instrument  
M-Bus (pulse output not available) Z695 5004 CS-instrument/CSInstrument/CS Instrument  
Sensor length 120 mm ZSL 0120 CS-instrument/CSInstrument/CS Instrument  
Sensor length 160 mm ZSL 0160 CS-instrument/CSInstrument/CS Instrument  
Sensor length 220 mm ZSL 0220 CS-instrument/CSInstrument/CS Instrument  
Sensor length 300 mm ZSL 0300 CS-instrument/CSInstrument/CS Instrument  
Sensor length 400 mm ZSL 0400 CS-instrument/CSInstrument/CS Instrument  
Sensor length 500 mm ZSL 0500 CS-instrument/CSInstrument/CS Instrument  
Sensor length 600 mm ZSL 0600 CS-instrument/CSInstrument/CS Instrument  
Sensor length 700 mm ZSL 0700 CS-instrument/CSInstrument/CS Instrument  
Ball valve I/I G 1/2" stainless steel 3300 0002 CS-instrument/CSInstrument/CS Instrument  
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006 CS-instrument/CSInstrument/CS Instrument  
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007 CS-instrument/CSInstrument/CS Instrument  
M12 – T plug for VA 500/520 to connect several sensors 020000823 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010 CS-instrument/CSInstrument/CS Instrument  
Oil and fat free, special cleaning   0699 4005 CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration of new instrument with ISO certificate 3200 0001 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration 3200 0015 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for mixed gases on request CS-instrument/CSInstrument/CS Instrument  
  Flow sensor VA 520 with integrated measuring section   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 57   Order no. CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524 CS-instrument/CSInstrument/CS Instrument  
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Option signal output / bus connection   CS-instrument/CSInstrument/CS Instrument  
M-Bus (pulse output not available) Z695 5004 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cables:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease 3200 0010 CS-instrument/CSInstrument/CS Instrument  
Option: special cleaning 0699 4005 CS-instrument/CSInstrument/CS Instrument  
57 5 point precision calibration with ISO certificate  3200 0001 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration 3200 0015 CS-instrument/CSInstrument/CS Instrument  
Real gas calibration for mixed gases on request CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Further accessories:   CS-instrument/CSInstrument/CS Instrument  
Closing cap for measuring section in aluminium 0190 0001 CS-instrument/CSInstrument/CS Instrument  
Closing cap for measuring section stainless steel 1.4404 0190 0002 CS-instrument/CSInstrument/CS Instrument  
M12 – T plug for VA 500/520 to connect several sensors 020000823 CS-instrument/CSInstrument/CS Instrument  
  Flow measurment VA 500/ VA 520 for below gases   CS-instrument/CSInstrument/CS Instrument  
    Order no. CS-instrument/CSInstrument/CS Instrument  
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane on request CS-instrument/CSInstrument/CS Instrument  
  Dew point sensors FA 510       CS-instrument/CSInstrument/CS Instrument  
57   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510 CS-instrument/CSInstrument/CS Instrument  
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2
for quick-lock coupling
0699 3390 CS-instrument/CSInstrument/CS Instrument  
More measuring chambers please see on catalogue page 60   CS-instrument/CSInstrument/CS Instrument  
  Connection cables for VA/FA sensors       CS-instrument/CSInstrument/CS Instrument  
57   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m with M12 plug 0553 0105 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 20 m with M12 plug 0553 0120 CS-instrument/CSInstrument/CS Instrument  
  Pressure sensors -cảm biến áp suất       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 57   Order no. CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 40, accuracy ± 0.5 % 0694 3930 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550 CS-instrument/CSInstrument/CS Instrument  
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560 CS-instrument/CSInstrument/CS Instrument  
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549 CS-instrument/CSInstrument/CS Instrument  
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004 CS-instrument/CSInstrument/CS Instrument  
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request CS-instrument/CSInstrument/CS Instrument  
  Temperature sensors - cảm biến nhiệt độ       CS-instrument/CSInstrument/CS Instrument  
57   Order no. CS-instrument/CSInstrument/CS Instrument  
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201 CS-instrument/CSInstrument/CS Instrument  
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing
(82x55x33 mm), temperature range: -50°C to +80°C
0604 0203 CS-instrument/CSInstrument/CS Instrument  
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm),
temperature range: -50°C to +80°C
0604 0204 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206 CS-instrument/CSInstrument/CS Instrument  
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207 CS-instrument/CSInstrument/CS Instrument  
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200 CS-instrument/CSInstrument/CS Instrument  
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201 CS-instrument/CSInstrument/CS Instrument  
  Connection cables for pressure/temperature sensors   CS-instrument/CSInstrument/CS Instrument  
57   Order no. CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 5 m, with open ends 0553 0108 CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 10 m, with open ends 0553 0109 CS-instrument/CSInstrument/CS Instrument  
  Clamp-on meters       CS-instrument/CSInstrument/CS Instrument  
57   Order no. CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends 0554 0510 CS-instrument/CSInstrument/CS Instrument  
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends 0554 0518 CS-instrument/CSInstrument/CS Instrument  
Calibration certificate for clamp-on ammeters, 5 calibration points  0554 3333 CS-instrument/CSInstrument/CS Instrument  
  CS ENERIUM 30 Current/effective power meter for panel mounting CS-instrument/CSInstrument/CS Instrument  
Catalogue page 57   Order no. CS-instrument/CSInstrument/CS Instrument  
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 Interface
0554 5355 CS-instrument/CSInstrument/CS Instrument  
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344  CS-instrument/CSInstrument/CS Instrument  
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345 CS-instrument/CSInstrument/CS Instrument  
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346 CS-instrument/CSInstrument/CS Instrument  
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347 CS-instrument/CSInstrument/CS Instrument  
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348 CS-instrument/CSInstrument/CS Instrument  
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349  CS-instrument/CSInstrument/CS Instrument  
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cable CS ENERIUM 30:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 5 m, with open ends 0553 0108 CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 10 m, with open ends 0553 0109 CS-instrument/CSInstrument/CS Instrument  
  Connection cable variable length, open ends on both sides 0553 0126 CS-instrument/CSInstrument/CS Instrument  
  FA 500 dew point monitoring - Thiết bị giám sát điểm sương      
Catalogue page 61 Order no. CS-instrument/CSInstrument/CS Instrument  
FA 500 dew point sensor for refrigeration driers, -20...50°Ctd 0699 0501 CS-instrument/CSInstrument/CS Instrument  
FA 500 dew point sensor for desiccant driers, -80...20°Ctd 0699 0502 CS-instrument/CSInstrument/CS Instrument  
FA 500 dew point sensor,  -60...30°Ctd 0699 0503 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Options:   CS-instrument/CSInstrument/CS Instrument  
Ethernet-Interface for VA500/VA520, FA500     Z695 5006 CS-instrument/CSInstrument/CS Instrument  
Ethernet-Interface PoE for VA500/VA520, FA500 Z695 5007 CS-instrument/CSInstrument/CS Instrument  
M-Bus (pulse output not available) Z695 5004 CS-instrument/CSInstrument/CS Instrument  
Option analogue output FA5xx, Special version 2…10 Volt Z699 0510 CS-instrument/CSInstrument/CS Instrument  
Option max. pressure FA5xx 350 bar Z699 0515 CS-instrument/CSInstrument/CS Instrument  
Option max. pressure FA5xx 500 bar Z699 0516 CS-instrument/CSInstrument/CS Instrument  
Option special scaling FA5xx 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514 CS-instrument/CSInstrument/CS Instrument  
Option connection thread FA5xx, 5/8" UNF Z699 0511 CS-instrument/CSInstrument/CS Instrument  
Option connection thread FA5xx, 1/2" NPT Z699 0512 CS-instrument/CSInstrument/CS Instrument  
Option surface condition FA5xx, free of oil & grease Z699 0517 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Connection cables:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 5 m shielded 0553 0129 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA, 10 m shielded 0553 0130 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA sensors, 5 m with 90° offset  M12 plug 0553 0118 CS-instrument/CSInstrument/CS Instrument  
Connection cable for VA/FA sensors, 10 m with 90° offset  M12 plug 0553 0119 CS-instrument/CSInstrument/CS Instrument  
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 5 m 0553 0106 CS-instrument/CSInstrument/CS Instrument  
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m 0553 0107 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Measuring chambers:   CS-instrument/CSInstrument/CS Instrument  
Standard measuring chamber up to 16 bar 0699 3390 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for atmospheric dew point 0699 3690 CS-instrument/CSInstrument/CS Instrument  
High pressure measuring chamber up to 350 bar 0699 3590 CS-instrument/CSInstrument/CS Instrument  
Measuring Chamber for granulate dryers up to 250 mbar 0699 3490 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290 CS-instrument/CSInstrument/CS Instrument  
Quick-lock coupling  NW 7,2 sealing tape 0530 1101 CS-instrument/CSInstrument/CS Instrument  
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Power supply:   CS-instrument/CSInstrument/CS Instrument  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110 CS-instrument/CSInstrument/CS Instrument  
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail 0699 3340 CS-instrument/CSInstrument/CS Instrument  
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 0554 0109 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
  Calibration and adjustment:   CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 11.3% RH 0554 0002 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 33 % RH 0554 0004 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 75,3 % RH 0554 0005 CS-instrument/CSInstrument/CS Instrument  
  FA 515 Ex Dew point measurement in explosive areas   CS-instrument/CSInstrument/CS Instrument  
Catalogue page 62   Order no. CS-instrument/CSInstrument/CS Instrument  
FA 515 Ex pressure dew point meter (-80 to 20°Ctd) 0699 5515 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Options:   CS-instrument/CSInstrument/CS Instrument  
Special scaling, Analogue output to other humidity parameters:
% RH g/m3, mg/m3, ppm V/V, g/kg
Z699 0514 CS-instrument/CSInstrument/CS Instrument  
Intrinsically safe power supply, safety barriers 0554 3071 CS-instrument/CSInstrument/CS Instrument  
High pressure measuring chamber up to 350 bar 0699 3590 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Mains units:   CS-instrument/CSInstrument/CS Instrument  
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110 CS-instrument/CSInstrument/CS Instrument  
Mains unit on DIN rail, 100-240 VAC / 24 VDC, 0.35 A 0699 3340 CS-instrument/CSInstrument/CS Instrument  
Mains unit 100-240 VAC/24 VDC, 0.35 A for Series VA/FA 400, 2 m cable 0554 0107 CS-instrument/CSInstrument/CS Instrument  
  Measuring chambers          
63   Order no. CS-instrument/CSInstrument/CS Instrument  
Standard measuring chamber up to 16 bar 0699 3390 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for atmospheric dew point 0699 3690 CS-instrument/CSInstrument/CS Instrument  
High pressure measuring chamber up to 350 bar 0699 3590 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber for granulate dryers for minimum over pressure 0699 3490 CS-instrument/CSInstrument/CS Instrument  
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290 CS-instrument/CSInstrument/CS Instrument  
  Calibration and adjustments of new devices - Dich vụ hiệu chuẩn   CS-instrument/CSInstrument/CS Instrument  
64   Order no. CS-instrument/CSInstrument/CS Instrument  
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate 0699 3396 CS-instrument/CSInstrument/CS Instrument  
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 11.3% RH 0554 0002 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 33 % RH 0554 0004 CS-instrument/CSInstrument/CS Instrument  
Control and calibration set 75,3 % RH 0554 0005 CS-instrument/CSInstrument/CS Instrument  
  Re-calibration (not discountable)       CS-instrument/CSInstrument/CS Instrument  
64   Order no. CS-instrument/CSInstrument/CS Instrument  
Precision re-calibration at -40°C dew point with ISO certificate 0699 3333 CS-instrument/CSInstrument/CS Instrument  
Precision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable 0700 7710 CS-instrument/CSInstrument/CS Instrument  
Replacement unit for the period of re-calibration 0699 3900 CS-instrument/CSInstrument/CS Instrument  
Dew point meter in exchange with calibration certificate at -40° Ctd 0699 3990 CS-instrument/CSInstrument/CS Instrument  
  VA 550 Flow sensor       CS-instrument/CSInstrument/CS Instrument  
Catalogue page 79 + 80   Order no. CS-instrument/CSInstrument/CS Instrument  
VA 550 Flow sensor, measuring head in robust aluminium die cast housing 0695 0550 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Measuring range: Bestell-Code CS-instrument/CSInstrument/CS Instrument  
A1 - Standard version (92,7 m/s) A1 CS-instrument/CSInstrument/CS Instrument  
A2 - Max version (185 m/s) A2 CS-instrument/CSInstrument/CS Instrument  
A3 - High-Speed version (224 m/s) A3 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Screw-in thread:   CS-instrument/CSInstrument/CS Instrument  
B1 - G 1/2" outer thread B1 CS-instrument/CSInstrument/CS Instrument  
B2 - NPT 1/2" outer thread B2 CS-instrument/CSInstrument/CS Instrument  
B3 - PT 1/2" outer thread B3 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Mounting length / shaft length:   CS-instrument/CSInstrument/CS Instrument  
C1 - 220 mm C1 CS-instrument/CSInstrument/CS Instrument  
C2 - 300 mm C2 CS-instrument/CSInstrument/CS Instrument  
C3 - 400 mm C3 CS-instrument/CSInstrument/CS Instrument  
C4 - 500 mm C4 CS-instrument/CSInstrument/CS Instrument  
C5 - 600 mm C5 CS-instrument/CSInstrument/CS Instrument  
C7 - 160 mm C7 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Option display:   CS-instrument/CSInstrument/CS Instrument  
D1 - with integrated display D1 CS-instrument/CSInstrument/CS Instrument  
D2 - without display D2 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Option signal outputs / bus connection:   CS-instrument/CSInstrument/CS Instrument  
E1 - 2x4...20mA a. output,galv.isolated,pulse output RS485 Modbus-RTU E1 CS-instrument/CSInstrument/CS Instrument  
E4 - 1x4…20mA analogue output (not galv. isolated), pulse output, RS 485 (Modbus RTU) E4 CS-instrument/CSInstrument/CS Instrument  
E5 - Ethernet-Interface (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) E5 CS-instrument/CSInstrument/CS Instrument  
E7 - 2x4..20mA analogue output passive,pulse output RS485 (Mb-RTU) E7 CS-instrument/CSInstrument/CS Instrument  
Catalogue page 79 + 80 E8 - M-Bus (Z6955504) E8 CS-instrument/CSInstrument/CS Instrument  
E9 -  Ethernet-Interface PoE (Power over Ethernet) (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) E9 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Calibration:   CS-instrument/CSInstrument/CS Instrument  
F1 - no real gas calibration - gas adjustment via gas constant F1 CS-instrument/CSInstrument/CS Instrument  
F2 - real gas calibration in the gas type as selected below F2 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Gas type:   CS-instrument/CSInstrument/CS Instrument  
G1 - Compressed air G1 CS-instrument/CSInstrument/CS Instrument  
G2 - Nitrogen (N2) G2 CS-instrument/CSInstrument/CS Instrument  
G3 - Argon (Ar) G3 CS-instrument/CSInstrument/CS Instrument  
G4 - Carbon dioxide (CO2) G4 CS-instrument/CSInstrument/CS Instrument  
G5 - Oxygen (O2) G5 CS-instrument/CSInstrument/CS Instrument  
G6 - Nitrous Oxide (N2O) G6 CS-instrument/CSInstrument/CS Instrument  
G7 - Natural gas (NG) G7 CS-instrument/CSInstrument/CS Instrument  
G8 - Helium (He) - Real gas calibration required  G8 CS-instrument/CSInstrument/CS Instrument  
G9 - Propane (C3H8) - Real gas calibration required  G9 CS-instrument/CSInstrument/CS Instrument  
G10 - Methane (CH4) G10 CS-instrument/CSInstrument/CS Instrument  
G11 - Biogas (Methane 50% : CO2 50%) G11 CS-instrument/CSInstrument/CS Instrument  
G12 - Hydrogen (H2) - Real gas calibration required  G12 CS-instrument/CSInstrument/CS Instrument  
G90 -Further gas G90 CS-instrument/CSInstrument/CS Instrument  
G91 - Gas mixture G91 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Maximum pressure:   CS-instrument/CSInstrument/CS Instrument  
H3 - 16 bar H3 CS-instrument/CSInstrument/CS Instrument  
H1 - 50 bar (not for DVGW approval) H1 CS-instrument/CSInstrument/CS Instrument  
H2 - 100 bar (not for DVGW approval) H2 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Surface condition:   CS-instrument/CSInstrument/CS Instrument  
I1 - Standard version I1 CS-instrument/CSInstrument/CS Instrument  
I2 - Special cleaning - oil and grease free (e.g. for oxygen) I2 CS-instrument/CSInstrument/CS Instrument  
I3 - LABS free and silicone free, special cleaning oil and grease free I3 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Accuracy class:   CS-instrument/CSInstrument/CS Instrument  
J1 - ± 1,5% of measured value (standard) J1 CS-instrument/CSInstrument/CS Instrument  
J2 - ± 1 % of measured value (precision) J2 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Maximum gas temperature at the sensor tip:   CS-instrument/CSInstrument/CS Instrument  
K1 - up to 120°C gas temperature (only for ATEX - version) K1 CS-instrument/CSInstrument/CS Instrument  
K2 - up to 180°C gas temperature (not for ATEX - version) K2 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Approvals:   CS-instrument/CSInstrument/CS Instrument  
L1 - Non-explosive area - no approval L1 CS-instrument/CSInstrument/CS Instrument  
L2 - ATEX II 2G Ex d IIC T4 L2 CS-instrument/CSInstrument/CS Instrument  
79 + 80 L3 - DVGW approval (for natural gas) L3 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
Reference conditions:   CS-instrument/CSInstrument/CS Instrument  
M1 - 20°C, 1000 hPa M1 CS-instrument/CSInstrument/CS Instrument  
M2 - 0°C, 1013,25 hPa M2 CS-instrument/CSInstrument/CS Instrument  
M3 - 15°C, 981 hPa M3 CS-instrument/CSInstrument/CS Instrument  
M4 - 15°C, 1013,25 hPa M4 CS-instrument/CSInstrument/CS Instrument  
    CS-instrument/CSInstrument/CS Instrument  
R1 - Special measuring range R1 CS-instrument/CSInstrument/CS Instrument  
Further accessories:   CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 5 m with open ends 0553 0108 CS-instrument/CSInstrument/CS Instrument  
Connection cable for sensors 10 m with open ends 0553 0109 CS-instrument/CSInstrument/CS Instrument  
Ethernet connection cable length 5 m, M12 plug x-coded (8 poles) to RJ 45 plug 0553 2503 CS-instrument/CSInstrument/CS Instrument  
Ethernet connection cable length 10 m, M12 plug x-coded (8 poles) to RJ 45 plug 0553 2504 CS-instrument/CSInstrument/CS Instrument  
5 point precision calibration of new instrument with ISO certificate 3200 0001 CS-instrument/CSInstrument/CS Instrument  
Additional calibration point volume flow VA5xx serial, freely selectable 0700 7720 CS-instrument/CSInstrument/CS Instrument  
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007 CS-instrument/CSInstrument/CS Instrument  
High-pressure protection f. installation from 10 to 100 bar (for VA 550) 0530 1115 CS-instrument/CSInstrument/CS Instrument  
High-pressure protection f. installation from 10 to 16 bar DVGW (for VA 550) 0530 1116 CS-instrument/CSInstrument/CS Instrument  
PNG cable screwing - standard 0553 0552 CS-instrument/CSInstrument/CS Instrument  
PNG cable screwing – for ATEX 0553 0551 CS-instrument/CSInstrument/CS Instrument  
         
  VA 570 - Flow sensor with integrated measuring section      
Catalogue page 78 + 80   Order no.    
VA 570 Flow sensor with integrated 1/2" measuring section 0695 0570    
VA 570 Flow sensor with integrated 3/4" measuring section 0695 0571    
VA 570 Flow sensor with integrated 1" measuring section 0695 0572    
VA 570 Flow sensor with integrated 1 1/4" measuring section 0695 0573    
VA 570 Flow sensor with integrated 1 1/2" measuring section 0695 0574    
VA 570 Flow sensor with integrated 2" measuring section 0695 0575    
           
VA 570 Flow sensor with integrated DN 15 measuring section with weld neck flange 0695 2570    
VA 570 Flow sensor with integrated DN 20 measuring section with weld neck flange 0695 2571    
VA 570 Flow sensor with integrated DN 25 measuring section with weld neck flange 0695 2572    
VA 570 Flow sensor with integrated DN 32 measuring section with weld neck flange 0695 2573    
VA 570 Flow sensor with integrated DN 40 measuring section with weld neck flange 0695 2574    
VA 570 Flow sensor with integrated DN 50 measuring section with weld neck flange 0695 2575    
VA 570 Flow sensor with integrated DN 65 measuring section with weld neck flange 0695 2576    
VA 570 Flow sensor with integrated DN 80 measuring section with weld neck flange 0695 2577    
       
Outer thread measuring section: Bestell-Code    
A2 - NPT outer thread A2    
       
Option display -Lựa chọn hiển thị      
B1 - with integrated display B1    
B2 - without display B2    
         
78 + 80 Option signal outputs / bus connection:      
C1 - 2x4...20mA analogue output galv. isolated, pulse output RS485 C1    
C4 - 1x4…20mA analogue output (not galv. isolated), pulse output, RS 485 (Modbus RTU) C4    
C5 -  Ethernet-Interface (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) C5    
C7 - 2x4..20mA analogue output passive, pulse outp.RS485 (Mb-RTU) C7    
C8 - E8 - M-Bus (Z6955504) C8    
C9 - Ethernet-Interface PoE (Power over Ethernet) (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) C9    
       
Calibration:      
D1 - no real gas calibration - gas adjustment via gas constant D1    
D2 - real gas calibration in the selected gas type D2    
Gas type:      
E1 - compressed air E1    
E2 - Nitrogen (N2) E2    
E3 - Argon (Ar) E3    
E4 - Carbon dioxide (CO2) E4    
E5 - Oxygen (O2) E5    
E6 - Nitrous oxide (N2O) E6    
E7 - Natural gas (NG) E7    
E8 - Helium (He) - Real gas calibration required  E8    
E9 - Propan (C3H8) - Real gas calibration required  E9    
E10 - Methane (CH4) E10    
E11 - Biogas (Methane 50% : CO2 50%) E11    
E12 - Hydrogen (H2) - Real gas calibration required E12    
E90 - Further gas E90    
E91 - Gas mixture E91    
       
Reference conditions:      
F1 - 20°C, 1000 hPa F1    
F2 - 0°C, 1013,25 hPa F2    
F3 - 15°C, 981 hPa F3    
F4 - 15°C, 1013,25 hPa F4    
       
Maximum pressure:      
G1 - 16 bar (Standard) G1    
G2 - 40 bar (High pressure) - (not for DVGW approval) G2    
       
Surface condition:      
H1 - Standard version H1    
H2 - Special cleaning - oil and grease free (e.g. for oxygen) H2    
H3 - LABS free and silicone free version, incl. oil and grease free H3    
       
78 +80 Accuracy class:      
I1 - ± 1.5% of measured value (standard) I1    
I2 - ± 1 % of measured value (precision) I2    
       
Maximum gas temperature at the sensor tip:      
J1 - up to 120°C gas temperature (only for ATEX - version) J1    
J2 - up to 180°C gas temperature (not for ATEX - version) J2    
       
Approvals:      
K1 - Non-explosive area - no approval K1    
K2 - ATEX II 2G Ex d IIC T4 K2    
K3 - DVGW approval (for natural gas) K3    
R1 - Special measuring range R1    
Further accessories:      
Connection cable for sensors 5 m with open ends 0553 0108    
Connection cable for sensors 10 m with open ends 0553 0109    
Ethernet connection cable length 5 m, M12 plug x-coded (8 poles) to RJ 45 plug 0553 2503    
Ethernet connection cable length 10 m, M12 plug x-coded (8 poles) to RJ 45 plug 0553 2504    
5 point precision calibration of new instrument with ISO certificate 3200 0001    
Additional calibration point volume flow VA5xx serial, freely selectable 0700 7720    
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007    
PNG cable screwing - standard 0553 0552    
PNG cable screwing – for ATEX 0553 0551    
  VA 500 - Flow sensor for compressed air and gases      
Catalogue page 83   Order no.    
VA 500 flow sensor, with RS 485 interface (Modbus-RTU) with analogue output 4...20mA and pulse output (galvanically separated), standard version (92,7 m/s) 0695 5001    
       
Measuring range:      
Max-version (185m/s) Z695 5003    
High-Speed-Version (224 m/s) Z695 5002    
       
Option display:      
with integrated display Z695 5000    
without display      
       
Option signal output / bus connection:      
Standard      
Ethernet-Interface for VA500/VA520, FA500     Z695 5006    
Ethernet-Interface PoE for VA500/VA520, FA500 Z695 5007    
M-Bus (pulse output not available) Z695 5004    
       
Catalogue page 83 Mounting length / shaft length:      
220 mm ZSL0220    
120 mm ZSL0120    
160 mm ZSL0160    
300 mm ZSL0300    
400 mm ZSL0400    
500 mm ZSL0500    
600 mm ZSL0600    
700 mm ZSL0700    
       
Surface condition:      
Special cleaning - oil and grease free (e.g. for oxygen) 0699 4005    
LABS free and silicone free version incl.cleaning oil and grease free 0699 4007    
       
Gas type:      
Compressed air      
Nitrogen (N2)      
Argon (Ar)      
Carbon dioxide (CO2)      
Oxygen (O2)      
Nitrous oxide (N2O)      
Natural gas (NG)      
Helium (He) - Real gas calibration required      
Propane (C3H8) - Real gas calibration required      
Methane (CH4)      
Biogas (Methane 50% : CO2 50%)      
Hydrogen (H2) - Real gas calibration required      
Further gas      
Gas mixture      
       
Calibration:      
Real gas calibration in the selected gas type      
       
Special measuring range:      
Special measuring range freely selectable Z695 4006    
       
Accuracy class:      
± 1 % of measured value (precision) Z695 5005    
       
Further accessories:      
Ball valve I/I G 1/2" stainless steel 3300 0002    
Welding neck, L = 35 mm male screw, R1/2",stainless steel 1.4301 3300 0006    
Welding neck, L= 35 mm, male screw,  R1/2",stainless steel 1.44571 3300 0007    
M12 – T plug for VA 500/520 to connect several sensors 020000823    
         
  Connection cables:      
  Connection cable for VA/FA, 5 m, with M12 plug 0553 0104    
  Connection cable for VA/FA, 10 m, with M12 plug 0553 0105    
  Connection cable for VA/FA, 20 m, with M12 plug 0553 0120    
  Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) to RJ45 0553 2503    
  Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) to RJ45 0553 2504    
83 Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug,
lenght 5 m
0553 0106    
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug,
lenght 10 m
0553 0107    
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007    
       
Mains units:      
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110    
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 0554 0109    
External display, chart recorder DS 400 0500 4000    
       
Calibration and adjustment - Hiệu chuẩn      
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010    
5 point precision calibration of new instrument with ISO certificate 3200 0001    
Real gas calibration 3200 0015    
Real gas calibration for mixed gases on request    
  VA 520 - Flow sensor with integrated measuring section -
Screw-in thread - cảm biến dòng khí gas
     
Catalogue page 87 Stainless steel: 1,4301 Order no.    
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520    
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521    
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522    
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523    
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526    
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524    
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525    
Stainless steel: 1,4571      
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4571 0695 1520    
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4571 0695 1521    
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4571 0695 1522    
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4571 0695 1523    
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4571 0695 1526    
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4571 0695 1524    
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4571 0695 1525    
Outer thread measuring section of VA 520 with stainless steel 1,4571      
NPT outer thread C2    
           
Option signal output / bus connection:      
Standard      
Ethernet-Interface für VA500/VA520, FA500 Z6955006    
Ethernet-Interface PoE für VA500/VA520, FA500 Z6955007    
M-Bus (pulse output not available) Z695 5004    
       
Gas type:      
Compressed air      
Nitrogen (N2)      
Argon (Ar)      
Carbon dioxide (CO2)      
Oxygen (O2)      
Nitrous oxide (N2O)      
Natural gas (NG)      
Helium (He) - Real gas calibration required      
Propane (C3H8) - Real gas calibration required      
Methane (CH4)      
Biogas (Methane 50% : CO2 50%)      
Hydrogen (H2) - Real gas calibration required      
Further gas      
Gas mixture      
       
Calibration:      
Real gas calibration in the selected gas type      
       
Catalogue page 87 Maximum pressure:      
40 bar (High-pressure)  Z695 0411    
Surface condition:      
Special cleaning - oil and grease free (e.g. for oxygen) 0699 4005    
LABS free and silicone free version incl.cleaning oil and grease free 0699 4007    
       
Special measuring range:      
Special measuring range freely selectable Z695 4006    
       
Accuracy class:      
± 1 % of measured value (precision) Z695 5005    
       
Connection cables:      
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104    
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105    
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120    
Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) RJ 45 plug 0553 2503    
Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) RJ 45 plug 0553 2504    
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 5 m 0553 0106    
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m 0553 0107    
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007    
Closing cap for measuring section in aluminium 0190 0001    
Closing cap for measuring section stainless steel 1.4404 0190 0002    
M12 – T plug for VA 500/520 to connect several sensors 020000823    
       
Mains units:      
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110    
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 0554 0109    
External display, chart recorder DS 400 0500 4000    
       
Calibration and adjustment:      
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010    
5 point precision calibration of new instrument with ISO certificate 3200 0001    
Real gas calibration 3200 0015    
Real gas calibration for mixed gases on request    
  VA 520 - Flow sensor with integrated measuring section - weld neck flange      
Catalogue page 89   Order no.    
VA520 Flow meter with integrated DN 15 measuring section with flange 0695 2521    
VA520 Flow meter with integrated DN 20 measuring section with flange 0695 2522    
VA520 Flow meter with integrated DN 25 measuring section with flange 0695 2523    
VA520 Flow meter with integrated DN 32 measuring section with flange 0695 2526    
VA520 Flow meter with integrated DN 40 measuring section with flange 0695 2524    
VA520 Flow meter with integrated DN 50 measuring section with flange 0695 2525    
VA520 Flow meter with integrated DN 65 measuring section with flange 0695 2527    
VA520 Flow meter with integrated DN 80 measuring section with flange 0695 2528    
       
Option signal output / bus connection:      
Standard      
Ethernet-Interface for VA500/VA520, FA500 Z695 5006    
Ethernet-Interface PoE for VA500/VA520, FA500 Z695 5007    
M-Bus (pulse output not available) Z695 5004    
       
Gas type:      
Compressed air      
Nitrogen (N2)      
Argon (Ar)      
Carbon dioxide (CO2)      
Oxygen (O2)      
Nitrous oxide (N2O)      
Natural gas (NG)      
Helium (He) - Real gas calibration required      
Propane (C3H8) - Real gas calibration required      
Methane (CH4)      
Biogas (Methane 50% : CO2 50%)      
Hydrogen (H2) - Real gas calibration required      
Further gas      
Gas mixture      
       
Calibration:      
Real gas calibration in the selected gas type      
       
Maximum pressure:      
40 bar (High-pressure)  Z695 0411    
       
Surface condition:      
Special cleaning - oil and grease free (e.g. for oxygen) 0699 4005    
LABS free and silicone free version incl.cleaning oil and grease free 0699 4007    
       
Special measuring range:      
Special measuring range freely selectable Z695 4006    
       
Catalogue page 89 Accuracy class:      
± 1 % of measured value (precision) Z695 5005    
       
Connection cables:      
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104    
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105    
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120    
Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) to RJ 45 0553 2503    
Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) to RJ 45 0553 2504    
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug,
lenght 5 m
0553 0106    
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m 0553 0107    
CS Service software incl. PC connection set for FA/VA 5xx sensors 0554 2007    
Closing cap for measuring section in aluminium 0190 0001    
Closing cap for measuring section stainless steel 1.4404 0190 0002    
M12 – T plug for VA 500/520 to connect several sensors 20000823    
       
Mains units:      
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110    
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 0554 0109    
External display, chart recorder DS 400 0500 4000    
       
Calibration and adjustment:      
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010    
5 point precision calibration of new instrument with ISO certificate 3200 0001    
Real gas calibration 3200 0015    
Real gas calibration for mixed gases on request    
  Flow measurement DS 400 for compressed air and gases      
Catalogue page 90   Order no.    
Flow station DS 400 for installation into existing pipelines consisting of: 0601 4006    
consisting of:      
Chart recorder DS 400 and flow sensor VA 500 in standard version (92,7 m/s),
Sensor length 220 mm
     
       
Options for chart recorder DS 400:      
Integrated data logger for 100 million measured values Z500 4002    
Integrated Ethernet and RS 485 interface Z500 4004    
External Gateway PROFIBUS for RS 485 interface connection Z500 3008    
External Gateway PROFINET for RS 485 interface connection Z500 3009    
2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors etc.) Z500 4001    
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003    
Integrated webserver Z500 4005    
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 4007    
Option "Totalizer function for analogue signals" Z500 4006    
       
VA 500 Verbrauchssensor, mit RS 485 (Modbus-RTU) Schnittstelle, mit Analogausgang 4...20mA und Impulsausgang (galvanisch getrennt) 0695 5001    
Max. Version (185 m/s) Z695 5003    
High Speed Version (224 m/s) Z695 5002    
Display Z695 5000    
M-Bus (pulse output not available) Z695 5004    
Sensor length 120 mm ZSL 0120    
Sensor length 160 mm ZSL 0160    
Sensor length 220 mm ZSL 0220    
Sensor length 300 mm ZSL 0300    
Sensor length 400 mm ZSL 0400    
Sensor length 500 mm ZSL 0500    
Sensor length 600 mm ZSL 0600    
Sensor length 700 mm ZSL 0700    
Ball valve I/I G 1/2" stainless steel 3300 0002    
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006    
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007    
M12 – T plug for VA 500/520 to connect several sensors 020000823    
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010    
Oil and fat free, special cleaning   0699 4005    
5 point precision calibration of new instrument with ISO certificate 3200 0001    
Real gas calibration 3200 0015    
Real gas calibration for mixed gases on request    
       
Further accessories:      
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040    
       
  Calibration and adjustment:      
5 point precision calibration including ISO certificate 3200 0001    
  DS 400 - Chart recorder          
Catalogue page 92   Order no.    
Product sensor-
input 1+2
sensor-
input 3+4
     
Chart recorder DS400 - with 3.5“ graphic display – easy operation with touch screen digital  ---------- 0500 4000 D    
digital digital 0500 4000 DD    
digital analogue 0500 4000 DA    
analogue  ---------- 0500 4000 A    
analogue analogue 0500 4000 AA    
       
Options:      
Integrated data logger for 100 Mio. measured values Z500 4002    
Integrated Ethernet- and RS 485 interface Z500 4004    
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) Z500 4001    
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003    
External Gateway PROFIBUS for RS 485 interface connection Z500 3008    
External Gateway PROFINET for RS 485 interface connection Z500 3009    
Integrated webserver Z500 4005    
"Mathematics calculation function" for 4 freely selectable channels,
(virtual channels): addition, subtraction, division, multiplication
Z500 4007    
"Totalizer function for analogue signals" Z500 4006    
       
Further accessories:      
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040    
CS Soft Network - Database Client/Server Solution (up to 5 DS 400) - 0554.7041
database (MySQL) to Server - data evaluation via Client-Software
0554 7041    
CS Soft Network - Database Client/Server Solution (up to 10 DS 400) - 0554.7042
database (MySQL) to Server - data evaluation via Client-Software
0554 7042    
CS Soft Network - Database Client/Server Solution (up to 20 DS 400) - 0554.7043
database (MySQL) to Server - data evaluation via Client-Software
0554 7043    
CS Soft Network - Database Client/Server Solution (> 20 DS 400) - 0554.7044
database (MySQL) to Server - data evaluation via Client-Software
0554 7044    
Software Support / h 9999 9998    
Ready for plug in and parametrization 0990 0010    
Everything ready for plug in 0990 0011    
  Flow sensor VA 500          
Catalogue page 93   Order no.    
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) 0695 5001    
Max. Version (185 m/s) Z695 5003    
HighSpeed version (224 m/s) Z695 5002    
Display Z695 5000    
M-Bus (pulse output not available) Z695 5004    
Sensor length 120 mm ZSL 0120    
Sensor length 160 mm ZSL 0160    
Sensor length 220 mm ZSL 0220    
Sensor length 300 mm ZSL 0300    
Sensor length 400 mm ZSL 0400    
Sensor length 500 mm ZSL 0500    
Sensor length 600 mm ZSL 0600    
Sensor length 700 mm ZSL 0700    
Ball valve I/I G 1/2" stainless steel 3300 0002    
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 3300 0006    
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 3300 0007    
M12 – T plug for VA 500/520 to connect several sensors 20000823    
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease  3200 0010    
Oil and fat free, special cleaning   0699 4005    
5 point precision calibration of new instrument with ISO certificate 3200 0001    
Real gas calibration 3200 0015    
Real gas calibration for mixed gases on request    
  Flow sensor VA 520 with integrated measuring section - Cảm biến  dòng khí gas      
Catalogue page 93 Order no.    
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 0695 0520    
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 0695 0521    
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 0695 0522    
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 0695 0523    
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 0695 0526    
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 0695 0524    
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 0695 0525    
Option:      
M-Bus (pulse output not available) Z695 5004    
       
Connection cables:      
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104    
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105    
Connection cable for VA/FA, 20 m, with M12 plug 0553 0120    
       
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease 3200 0010    
Option: special cleaning 0699 4005    
5 point precision calibration with ISO certificate  3200 0001    
93 Real gas calibration 3200 0015    
Real gas calibration for mixed gases on request    
Further accessories:      
Closing cap for measuring section in aluminium 0190 0001    
Closing cap for measuring section stainless steel 1.4404 0190 0002    
M12 – T plug for VA 500/520 to connect several sensors 020000823    
  Flow measurment VA 500/ VA 520 for below gases - cảm biến dòng khí gas      
        Order no.    
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane     on request    
  Dew point sensors FA 510 - cảm biến điểm sương    
93   Order no.    
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0510    
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface 0699 0512    
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2
for quick-lock coupling
0699 3390    
More measuring chambers please see on catalogue page 60      
  Connection cables for VA/FA sensors - cáp kết nối     
93   Order no.    
Connection cable for VA/FA, 5 m with M12 plug 0553 0104    
Connection cable for VA/FA, 10 m with M12 plug 0553 0105    
Connection cable for VA/FA, 20 m with M12 plug 0553 0120    
  Pressure sensors - cảm biến áp suất          
Catalogue page 93   Order no.    
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale 0694 1886    
Precision pressure sensor CS 16, accuracy ± 0.5 % 0694 3555    
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale 0694 0356    
Precision Pressure sensor CS 40, accuracy ± 0.5 % 0694 3930    
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale 0694 3550    
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale 0694 3556    
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale 0694 3554    
Precision pressure sensorCS 100, 0...100 bar, ± 0,5 % accuracy of full scale 0694 3557    
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale 0694 3558    
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale 0694 3559    
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale 0694 3553    
Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar
0694 3560    
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % 0694 3549    
Calibration of pressure sensor 5 points between 0 and 10/16 bar 3200 0004    
Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar
on request    
  Temperature sensors - cảm biến nhiệt          
93   Order no.    
Screw-in temperature  probe PT 100 class A, length: 300 mm, d=6mm,
with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)
0604 0201    
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing
(82x55x33 mm), temperature range: -50°C to +80°C
0604 0203    
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm),
temperature range: -50°C to +80°C
0604 0204    
Temperature probe PT 100 class A (4-wire)  with cable, length: 300 mm, d=6 mm,
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0205    
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0206    
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6
-70°C to +260°C, 5 m connection cable (PFA) with open ends
0604 0207    
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100
class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends
0604 0208    
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar
material: stainless steel, temperature range: max. +260°C 
0554 0200    
Clamp screwing 6mm; G 1/2" stainless steel clamp ring
pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C 
0554 0201    
  Connection cables for pressure/temperature sensors - cáp kết nối    
93   Order no.    
Connection cable for sensors 5 m, with open ends 0553 0108    
Connection cable for sensors 10 m, with open ends 0553 0109    
  Clamp-on meters - đồng hồ đo khí dạng gắn ngoài      
93   Order no.    
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends 0554 0510    
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends 0554 0518    
Calibration certificate for clamp-on ammeters, 5 calibration points  0554 3333    
  CS ENERIUM 30 Current/effective power meter for panel mounting      
Catalogue page 93   Order no.    
CS ENERIUM 30 Current/effective power meter for panel mounting,
with RS 485 interface
0554 5355    
Current transformer 100/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5344     
Current transformer 200/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 21 mm)
0554 5345    
Current transformer 300/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5346    
Current transformer 500/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5347    
Current transformer 600/5 A connectable to current/effective power
meter for panel mounting (for cabels up to Ø 22 mm)
0554 5348    
Current transformer 1000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)
0554 5349     
Current transformer 2000/5 A connectable to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)
0554 5350    
       
Connection cable CS ENERIUM 30      
Connection cable for sensors 5 m, with open ends 0553 0108    
Connection cable for sensors 10 m, with open ends 0553 0109    
  Connection cable variable length, open ends on both sides 0553 0126    
  VA 409 Flow direction switch for compressed air systems- công tắc lưu lượng cho khí nén      
98 Order no.    
Flow direction switch VA 409 0695 0409    
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110    
Connection cable VA/FA Series 400, 5 m with M12 plug 0553 0104    
Connection cable VA/FA Series 400, 10 m with M12 plug 0553 0105    
  Measuring sections of stainless steel 1.4301 incl. ball valve       
Catalogue page 100 Up to DN 65 (G2 1/2”) with external thread, from DN 80 with weld neck flange according to DIN 2633 Order no.    
Measuring section G 1/2” 21.3 x 2.6 mm 500 mm 4000 0015    
Measuring section G 3/4” 26.9 x 2.6 mm 600 mm 4000 0020    
Measuring section G 1” 33.7 x 3.2 mm 750 mm 4000 0025    
Measuring section G 1 1/4” 42.4 x 3.2 mm 900 mm 4000 0032    
Measuring section G 1 1/2” 48.3 x 3.2 mm 1000 mm 4000 0040    
Measuring section G 2” 60.3 x 3.6 mm 1250 mm 4000 0050    
Measuring section G 2 1/2” 76.1 x 3.6 mm 1500 mm 4000 0065    
Measuring section DN 80/88.9 88.9 x 2.0 mm 1850 mm 4000 0080    
Measuring section DN 100/114.3 114.3 x 2.0 mm 2104 mm 4000 0100    
Measuring section DN 125/139.7 139.7 x 3.0 mm 2860 mm 4000 0125    
Measuring section DN 150/168,3 168,3 x 3,0 mm 3110 mm 4000 0150    
Accessories:      
Drilling jig incl. drill (Ø 13 mm) 0530 1108    
High-pressure protection f. installation from 10 to 50 bar (for VA400/500) 0530 1105    
High-pressure protection f. installation from 10 to 100 bar (for VA 550) 0530 1115    
High-pressure protection f. installation from 10 to 16 bar DVGW (for VA 550) 0530 1116    
  Drilling clamp incl. ball valve 1/2"       
Catalogue page 101   Order no.    
Spot drilling collar for pipe diameter 032 - 036 mm, length: 100 mm 0500 0446    
Spot drilling collar for pipe diameter 036 - 040 mm, length: 100 mm 0500 0448    
Spot drilling collar for pipe diameter 040 - 044 mm, length: 150 mm 0500 0449    
Spot drilling collar for pipe diameter 044 - 051 mm, length: 200 mm 0500 0610    
Spot drilling collar for pipe diameter 048 - 055 mm, length: 200 mm 0500 0611    
Spot drilling collar for pipe diameter 052 - 059 mm, length: 200 mm 0500 0612    
Spot drilling collar for pipe diameter 057 - 064 mm, length: 200 mm 0500 0613    
Spot drilling collar for pipe diameter 063 - 070 mm, length: 200 mm 0500 0614    
Spot drilling collar for pipe diameter 070 - 077 mm, length: 200 mm 0500 0615    
Spot drilling collar for pipe diameter 075 - 083 mm, length: 200 mm 0500 0616    
Spot drilling collar for pipe diameter 082 - 090 mm, length: 200 mm 0500 0617    
Spot drilling collar for pipe diameter 087 - 097 mm, length: 200 mm 0500 0618    
Spot drilling collar for pipe diameter 095 - 104 mm, length: 200 mm 0500 0619    
Spot drilling collar for pipe diameter 102 - 112 mm, length: 200 mm 0500 0620    
Spot drilling collar for pipe diameter 108 - 118 mm, length: 200 mm 0500 0621    
Spot drilling collar for pipe diameter 118 - 128 mm, length: 200 mm 0500 0622    
101 Spot drilling collar for pipe diameter 125 - 135 mm, length: 200 mm 0500 0623    
Spot drilling collar for pipe diameter 133 - 144 mm, length: 200 mm 0500 0624    
Spot drilling collar for pipe diameter 145 - 155 mm, length: 250 mm 0500 0625    
Spot drilling collar for pipe diameter 151 - 161 mm, length: 250 mm 0500 0626    
Spot drilling collar for pipe diameter 159 - 170 mm, length: 250 mm 0500 0627    
Spot drilling collar for pipe diameter 168 - 180 mm, length: 250 mm 0500 0628    
Spot drilling collar for pipe diameter 180 - 191 mm, length: 250 mm 0500 0629    
Spot drilling collar for pipe diameter 193 - 203 mm, length: 300 mm 0500 0630    
Spot drilling collar for pipe diameter 200 - 210 mm, length: 300 mm 0500 0631    
Spot drilling collar for pipe diameter 209 - 220 mm, length: 300 mm 0500 0632    
Ball valve G 1/2"  I - R 1/2"O 0500 3009    
  Thickness meter CS 0495   - Thiết bị đo độ dày      
101   Order no.    
Thickness meter CS 0495, incl. case and calibration block 0560 0495    
  Re-calibration          
103   Order no.    
Re-calibration and 5 point precision alignment of consumption sensor with ISO certificate 0695 3333    
Real gas calibration 3200 0015    
Real gas calibration for mixed gases on request    
  OIL-Check & Particle counter PC 400 - Máy đếm và kiểm tra lượng dầu PC 400    
  Stationary solution DS 500 - Giải pháp tại chỗ DS 500 Order no.     
DS 500 – intelligent chart recorder in basic version (4 sensor inputs) 0500 5000    
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places 0554 8040    
Residual oil measurement:
OIL-Check 400 – residual oil content measurement of the vaporous residual oil content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to an external chart recorder.
0699 0070    
Sampling system OIL-Check 400:
Sampling system consisting of ½“ ball valve  (oil- and grease-free), 1 m stainless steel tube   6x1 mm (oil- and grease-free), clamp screwing (oil- and grease-free)
Z699 0075    
Alternative:
Portable sampling system consisting of 2 m PTFE hose, quick-lock coupling
(oil- and grease-free)
Z699 0074    
Options for systems > 16 bar:
Pressure reducer (oil- and grease-free), input pressure max. 300 bar, output pressure up to 10 bar
Z699 0076    
Connection cable for probes, 5 m with open ends 0553 0108    
PC 400 particle counter up to 0.1 µm for compressed air and gases, incl. pressure reducer/sampling hose/ calibration certificate, Modbus-RTU interface 0699 0040    
Connection cable for probes, 5 m with open ends 0553 0108    
FA 510 dew point sensor for adsorption driers -80°...20°Ctd  incl.  inspection  certificate,
4...20  mA analogue output (3-wire technology) and Modbus-RTU interface
0699 0510    
Standard measuring chamber up to 16 bar 0699 3390    
Connection cable for VA/FA Series, 5  m 0553 0104    
       
Mobile solution with DS 500 mobile, OIL-Check 400, PC 400, FA 510 - Giải pháp di động Bestell-Nr.     
DS 500 mobile - intelligent chart recorder with 4 sensors inputs 0500 5012    
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places 0554 8040    
Residual oil measurement:
OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to external chart recorders
0699 0070    
Mobile transport trolley including roles (outer dimensions: 1.0 x 0.7 x 0.35 m
(W x H x D)  with firmly mounted components of OIL-Check 400, PC 400, FA 510
0554 6017    
Mobile sampling system consisting of  2 m PTFE hose, quick lock coupling (oil- and grease-free) Z699 0074    
Connection cable for pressure, temperature, third party sensors to portable devices, 
ODU / open ends, 5 m
0553 0501    
PC 400 particle counter up to 0.1 µm for compressed air and gases, incl.
pressure reducer/sampling hose, calibration certificate, Modbus-RTU interface
0699 0040    
Connection cable for probes, 5 m with open ends 0553 0501    
FA 510 dew point sensor, -80°...+20°Ctd, incl. mobile measuring chamber and 5 m connection cable to portable devices  0699 1510    
       
OIL-Check 400 – stationary solution with DS 400
- Giải pháp kiểm tra lượng dầu tại chỗ DS 400
Order no.     
OIL-Check 400 – residual oil content measurement of the vaporous residual oil content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to an external chart recorder 0699 0070    
Option: DS 400 chart recorder integrated in the OIL-Check 400 Z699 0071    
Sampling OIL-Check 400: kiểm tra mẫu dầu DS-400
Sampling system consisting of ½“ ball valve  (oil- and grease-free), 1 m stainless steel tube   6x1 mm (oil- and grease-free), clamp screwing (oil- and grease-free)
Z699 0075    
Alternative:
Portable sampling system consisting of 2 m Teflon hose, quick-lock coupling (oil- amnd gas free)
Z699 0074    
Options for systems > 16 bar:
Pressure reducer (oil- and grease-free), input pressure max. 300 bar, output pressure up to
10 bar
Z699 0076    
Optionen for DS 400: Bestell-Nr.     
Option: Integrated data logger for 100 million measured values Z500 4002    
Option: Integrated Ethernet and RS 485 interface Z500 4004    
Option: Integrated Webserver Z500 4005    
Option: 2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors and so on) Z500 4001    
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places 0554 8040    
       
OIL-Check 400 portable solution with handle
- Thiết bị kiểm tra dầu dạng cầm tay series 400
Order no.     
OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration. Without integrated display, with alarm output 0…10 Volt for connection to external chart recorder 0699 0070    
Option: DS 400 chart recorder integrated in the OIL-Check 400 Z699 0071    
Option: Handle and pedestal for mobile use of the OIL-Check 400  Z699 0072    
Alternative:      
Option: Flight case for OIL-Check 400 Z699 0073    
Option: Mobile sampling system consisting of 2 m PTFE hose, quick lock coupling (oil- and grease-free) Z699 0074    
Optionen for DS 400:      
Option: Integrated data logger for 100 million measured values Z500 4002    
Option: Integrated Ethernet and RS 485 interface Z500 4004    
Option: Integrated Webserver Z500 4005    
Option: 2 additional sensor inputs for analogue sensors (pressure sensors,  temperature sensors and so on) Z500 4001    
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places 0554 8040    
       
Descreption Order no.     
Replacement unit OIL-Check for the period of re-calibration 0699 3910    
Replacement unit OIL-Check incl. DS 400 for the period of re-calibration 0699 3920    
Re-calibration OIL-Check incl. Certificate 0699 3301    
Re-calibration and maintenance OIL-Check incl. certificate, rate 1 for up to 8760 hours of operatio 0699 3302    
Re-calibration and maintenance OIL-Check incl. certificate, rate 2 for over 8760 hours of operation 0699 3303    
         
  LD 500/510 leak detector - Cảm biến phát hiện rò rỉ khí LC500/510    
Katalogseite 114-117   order-no.    
Set LD 500  0601 0105    
consisting of:      
LD 500 leak detector with acoustic trumpet, and integrated camera,
100 leak tags for marking the leakages on site
0560 0105    
Transportation case 0554 0106    
Sound-proof headset 0554 0104    
Focus tube with focus tip 0530 0104    
AC adapter plug 0554 0009    
Helix cable for connecting the ultrasonic sound sensor 02000 1402    
       
Set LD 510 0601 0106    
consisting of:      
LD 510 leak detector incl. acoustic trumpet, with integrated camera and additional input forexternal sensors, 100 leak tags for marking the leakages on site 0560 0106    
Transportation case 0554 0106    
Sound-proof headset 0554 0104    
Focus tube with focus tip 0530 0104    
AC adapter plug 0554 0009    
Helix cable for connecting the ultrasonic sound sensor 02000 1402    
Equipment:      
CS Leak Reporter – for detailed ISO 50001 reports.
Gives an illustrated survey of the found leakages and their possible savings. Measures for elimination including status display can be defined for every leakage.
0554 0105    
Gooseneck for leakage detection at sites which are difficult to access 0530 0105    
Parabolic mirror for leak detection at long distances 0530 0106    
Ultrasonic tone generator for leak testing 0554 0103    
500 leak tags for marking the leakages on site 0530 0107    
Calibration:      
Recalibration LD 500/LD510 inclusive certificate 0560 3333    
Further sensors / accessories for connection to LD 510:      
FA 510 dew point sensor for mobile devices, -80…+20°Ctd,
incl. mobile measuring chamber, 5m connection cable and perforated protection cap
0699 1510    
Flow sensor VA 500, Max version (185 m/s) sensor length 220 mm, incl. 5 m
connection cable
0695 1124    
Standard pressure sensor CS 16, 0…16 bar, ± 1 % accuracy of f. s 0694 1886    
Differential pressure sensor 1.6 bar diff. 0694 3561    
Connection cable for pressure, temperature or external sensors on mobile instruments,    ODU /open ends, 5 m  0553 0501    
CS Basic 2018 - data evaluation in graphic and table form - reading out of the measured data via USB Stick or Ethernet. License for 2 computers 0554 8040    
  LD 400 Leak detector - Cảm biến phát hiện rò rỉ khí LD400      
118-119   Order no.    
Set LD 400 leak detector 0601 0104    
consisting of:      
LD 400 Leak detector 0560 0104    
Transport case 0554 0106    
Sound-proof headset 0554 0104    
Focus tube with focus tip 0530 0104    
Battery charger 0554 0009    
Acoustictrumpet 0530 0109    
Accessory, not included in the set:      
Ultrasonic tone generator 0554 0103    
         
  Affordable differential pressure sensor for testing filter performance - cảm biến áp suất       
120-121   Order no.    
Differential Pressure Sensor 1.6 bar diff 0694 3561    
           
Connection cables:      
Connection cable for sensors 5 m with open ends 0553 0108    
Connection cable for sensors 10 m with open ends 0553 0109    
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 5 m
0553 0501    
Connection cable for pressure, temperature or external sensors on mobile instruments,
ODU / open ends, 10 m
0553 0502    
       
For mobile measurements in a set with PI 500:      
PI 500 portable measuring instrument with integrated data logger 0560 0511    
Differential Pressure Sensor 1.6 bar diff 0694 3561    
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m 0553 0501    
       
For stationary measurements in a set with DS 52:      
DS 52 LED display in wall housing 0500 0009    
Differential Pressure Sensor 1.6 bar diff 0694 3561    
Connection cable for sensors 5 m with open ends 0553 0108    
  DS 52 – Digital process meter - máy đo kỹ thuật số      
122   Order no.    
DS 52 LED display in wall housing 0500 0009    
       
Options:      
Supply 24 VDC instead of 230 VAC Z500 0001    
Supply 110 VAC instead 230 VAC Z500 0002    
Alarm unit mounted at wall housing Z500 0003    
Alarm unit for external mounting Z500 0004    
DS 52 – all-in one set for pressure monitoring /alerting,
consisting of DS 52 LED display and pressure sensor 0...16 bar
on request    
DS 52 – all-in one set for temperature monitoring /alerting,
consisting of DS 52 LED display and screw-in temperature probe -50...+500°C
on request    
  DS 51 – Digital panel meter          
123   Order no.    
DS 51 – digital meter for panel mounting, supply 230 VAC,
sensor input for 0(4)...20 mA signal, 2 alarm relays
0500 0006    
Options:      
Supply 24 VDC instead of 230 VAC Z500 0001    
Supply 110 VAC instead of 230 VAC Z500 0002    
  Re-Calibration and service (not discountable)      
64 + 103   Order no.    
Re-calibration and precision alignment 0699 3333    
Additional calibration point pressure dew point 0700 7710    
Re-calibration and 5 point precision alignment of flow sensor with ISO certificate 0695 3333    
Replacement unit for the period of re-calibration 0699 3900    
Dew point meter in exchange with calibration certificate from our instrument pool 0699 3990    
Flow sensor with calibration certificate from our instrument pool 0695 3990    
Re- calibration Oil Check with Certificate 0699 3301    
Re- calibration and maintenance Oil Check, with Certificate, rate 1 up to 8760 hours of operation 0699 3302    
Re- calibration and maintenance Oil Check, with Certificate, rate 2 over 8760 hours of operation 0699 3303    
Replacement unit OIL-Check for the period of re-calibration 0699 3910    
Replacement unit OIL-Check with DS 400 for the period of re-calibration 0699 3920    
Re- calibration particle counter PC 400 with Certificate 0699 3304    
  Products not included in the catalogue - Danh mục sản phẩm không bao gồm trong catalogue      
  FA 540 dew point sensor with same pinning at M12 plug as
FA 410
     
  FA 540 dew point sensor for desiccant driers -80...20°Ctd incl. inspection certificate,
4…20 mA output signal (3-wire connection) 
0699 0540    
  FA 540 dew point sensor for refrigeration driers -20...50°Ctd incl. inspection certificate,
4…20 mA output signal (3-wire connection) 
0699 0542    
         
  Connection cables:      
  Connection cable for VA/FA, 5 m, with M12 plug 0553 0104    
  Connection cable for VA/FA, 10 m, with M12 plug 0553 0105    
             
  Options for FA 540:      
  Option max. pressure FA5xx 350 bar Z699 0515    
  Option special scaling FA5xx, 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514    
  Option connection thread FA5xx, 5/8" UNF Z699 0511    
  Option surface condition FA5xx, free of oil & grease Z699 0517    
             
  Additional accessories:      
  Standard measuring chamber up to 16 bar 0699 3390    
  High pressure measuring chamber up to 350 bar 0699 3590    
  Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290    
  Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110    
  CS Service software incl. PC connection set for FA540/545 sensors 0554 2008    
             
  Calibration and adjustment:      
  Precision calibration at 3°Ctd including ISO certificate 0699 3396    
  Additional calibration point, freely selectable 0700 7710    
  FA 545 dew point sensor with same pinning at M12 plug as
FA 415 - cảm biến điểm sương FA 545
     
  FA 545 dew point sensor for refrigeration driers -20...50°Ctd incl. inspection certificate,
4…20 mA output signal (2-wire connection) 
0699 0547    
FA 545 dew point sensor for desiccant driers -80...20°Ctd incl. inspection certificate,
4…20 mA output signal (2-wire connection) 
0699 0545    
       
Connection cables:      
Connection cable for VA/FA, 5 m, with M12 plug 0553 0104    
Connection cable for VA/FA, 10 m, with M12 plug 0553 0105    
           
Options for FA 545:      
Option max. pressure FA5xx 350 bar Z699 0515    
Option special scaling FA5xx, 4…20 mA=__ … __ g/m³, ppm etc. Z699 0514    
Option connection thread FA5xx, 5/8" UNF Z699 0511    
Option surface condition FA5xx, free of oil & grease Z699 0517    
         
Additional accessories:      
Standard measuring chamber up to 16 bar 0699 3390    
High pressure measuring chamber up to 350 bar 0699 3590    
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread 0699 3290    
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx,
100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A
0554 0110    
CS Service software incl. PC connection set for FA540/545 sensors 0554 2008    
           
Calibration and adjustment:      
Precision calibration at 3°Ctd including ISO certificate 0699 3396    
Additional calibration point, freely selectable 0700 7710