Vantage NX

Adhesives, Biomaterials, Corrugated, Foam, Foil, Nonwovens, Packaging Materials, Paper, Paperboard, Plastic Films, Rubber, Tissue, Textiles

Tensile, Peel, Compression, COF, Cycling, Tear, Burst, ZDT, Flex/Bend, Stress Relaxation, Thickness, Insertion/Extraction, and more.

ASTM E4, ASTM F88, ASTM D790,  ASTM D791, ASTM D882, ASTM D3330, ISO 5893, ISO 7500-1, ISO 9283, EN 1002/1-4, TAPPI T494, TAPPI T541, TAPPI T811, TAPPI T825, TAPPI T839. (This list shows common standards note that the Vantage can be configured to meet a vast list of standards for ASTM, ISO, TAPPI, DIN, NWSP and others.)

1kN, 2kN, 5kN

Varies by model from 5N (1.1 lbf) to 5kN (1125 lbf)

Interchangeable load cells range from 5N (1.1 lbf) to 5kN (1125 lbf)

10% to 100% Load Capacity: ±0.25% Measuring Value, Less than 10% Load Capacity: ±0.025% of Load Cell Capacity

15 bit ADC (0.003% of 1.15 x Load Cell Capacity)

±6.4 micron/25 mm (± 0.00025/1.0 inch) or 0.025% of Distance

1kN Frames: 0.17 μm (6.7 μin), 2kN Frames: 0.05 μm (2.1 μin), 5kN Frames: 0.11 μm (4.2 μin)

Selectable: 50, 60, or 250 samples/second

Precision Ball Screw

1.3 to 1000 mm/min (0.05 to 40 in/min)

0.1 to 30 in/min: 1% of Set Speed, <0.1 in/min: 2% of Set Speed, >30 in/min: 2% of Set Speed

0.127 to 127 mm/sec2 (0.005 to 5 in/sec2)

1kN & 2kN Frames: 72 VA, 5kN Single Column Frames: 180 VA, 5kN Dual Column Frames: 216 VA

120-230 VAC ±10%, 50/60 Hz

Air Temperature – Operating: 10 to 50°C (50 to 122°F)
Relative Humidity – Operating: 10% to 85% (Non-Condensing)

Air Temperature – Storage: -25 to 70°C (-13 to 158°F)
Relative Humidity – Storage: 5% to 90% (Non-Condensing)

Emergency Stop Button
Upper and Lower Limit Switches with over-travel protection
Electronic Grip Collision Detection
Electronic Load Cell Overload Protection
Mechanical Load Cell Overload Protection:
– 50-250 N: 10 x Load Cell Capacity / 500-2000 N: 5 x Load Cell Capacity / 5-10 kN: 1.5 x Load Cell Capacity

PC Based

REQUIRES: MAP4 Software

Windows (Requires: Microsoft .NET Framework 4.5)