Dilas FT4200 Máy đo khoảng cách Delta Sensor

Giá bán: Liên hệ

Hãng sản xuất: Delta Sensor

Danh mục: Máy đo khoảng cách

Nhà cung cấp: Jon & Jul Viet Nam

Xuất sứ: Pháp

Bảo hành: 12 tháng

Ứng dụng sản phẩm: Thiết bị tự động hóa

Gọi lại cho tôi

Liên hệ tư vấn

Hưng

hung@jon-jul.com

0374830598

live:.cid.7db5d206f62020e9

Thông tin sản phẩm
Thông số kỹ thuật

Dilas FT4200 Máy đo khoảng cách Delta Sensor

1. Giới thiệu

- Dilas FT4200 Máy đo khoảng cách Delta Sensor Hiện đang được Cty Jon-Jul phân phối rộng rãi tại thị trường Việt Nam.

2. Thông số kỹ thuật

Laser Distance Meter for extreme conditions
Dilas FT4200

Measurement up to 500 m, on product up to 1350 °C
Fast sampling time
Profibus-DP communication protocol
Design for steel industry conditions

Features and benefits

The Dilas FT4200 is a digital, high performance, non-contact laser measurement sensor.
The target may be hot or cold, stationary or moving. Dilas FT4200 measures on all non-shiny surfaces.

Measurement range up to 500 m directly on the target
Measurement on hot products up to 1350 °C
High power infrared laser
Fast sampling time
Accuracy: ± 20 mm
Laser pointer (class 2M)
Sensor configuration with PC software
Autonomous sensor: ready to use, no calibration required
Water cooling and air purging for the steel industry

The Dilas FT4200 can be easily configured for optimal measurement depending on the application. A configuration software running under Windows operating system is used to quickly and easily view the readings and the status of the sensor, and a graphical user interface makes it simple to setup the sensor. The sensor has a RS232C configuration port at the back of the sensor (M12 connector) and each sensor is delivered with cable including a 9 points sub D connector for direct connection to a PC.

Typical applications

Position - Length measurement of a slab or bloom

Position control - discharging of reheat furnace

Detection of slabs (2 rows) and position control - discharging of reheat furnace

Presentation

The Dilas FT4200 is an autonomous sensor mounted in cast aluminium housing. A hood for protecting the window glass is fitted with an air-jet facility to blow a vertical air curtain in front of this glass. The case is mounted on a cooling plate including a stainless steel pipe and fixed to a mounting stand, adjustable in two axes. The electrical connection is made via a connector. The sensor is delivered already equipped with the corresponding plug with silicone-armoured cable (2 m standard length).

A RS232 connector is available at the rear of the sensor to connect a PC for configuration of the sensor.

Operating principle

The operation of the Dilas FT4200 is based on time of flight measurement. The sensor calculates the distance of the target surface using the time of flight of infrared laser pulses.

Profibus-DP

The Dilas FT4200 delivers analog output 4-20 mA and operator needs to select before order between with 2 choices of communication protocol: serial link RS485 or Profibus-DP.

Accessories

• USB to RS232 interface, reference 7935577
• Heat shield (Kit with mounting screws) to protect from direct radiation (ref. 7593258).