Photodiode Array Weld Hole Detection DTR340 / EMR-C Delta Sensor

Giá bán: Liên hệ

Hãng sản xuất: Delta Sensor

Danh mục: Weld Hole Detection

Nhà cung cấp: Jon & Jul Viet Nam

Xuất sứ: Pháp

Bảo hành: 12 tháng

Ứng dụng sản phẩm: Thiết bị tự động hóa

Gọi lại cho tôi

Liên hệ tư vấn

Hưng

hung@jon-jul.com

0374830598

live:.cid.7db5d206f62020e9

Thông tin sản phẩm
Thông số kỹ thuật

Photodiode Array Weld Hole Detection DTR340 / EMR-C Delta Sensor

1. Giới thiệu

- Photodiode Array Weld Hole Detection DTR340 / EMR-C Delta Sensor Hiện đang được Cty Jon-Jul phân phối rộng rãi tại thị trường Việt Nam.

2. Thông số kỹ thuật

Photodiode Array Weld Hole Detection
DTR340 / EMR-C

Large field of detection
For special applications

Typical applications

The DTR340 is a diode array detector. In association with the EMR LED light emitter, it is able to detect the weld hole made in order to locate the linking weld between two strips.

General description

The Weld Hole Detector DTR340 consists of a lens, a linear diode array, and a processing unit.
The Emitter EMR consist of an array of high power red LED.

Features

The DTR Weld Hole Detector has been designed for heavy industry with :

Adjustable mounting stand (2 axes). In case the sensor needs to be replaced, it can be easily dismounted from the stand, thus keeping the alignment.
Protective hood.
Control panel beneath a hinged cover at rear.

Installation

The DTR sensor detects the light emitted by an EMR through the weld hole. Sensor and emitter are fixed perpendicular to the line axis in order to take the lateral deviation of the strip into account.
The following conditions have to be held for a proper detection:

The DTR field of view and the emission of the EMR emitter should completely cover the lateral position of the hole.
The EMR emitter should cover the field of view of the DTR sensor.
The minimum hole diameter depending on the line speed is define in the graph below.

en-dtr340-003-800x600