Liên hệ tư vấn

0374830598

CES-I-BP-M-C07-SB-160076 Bộ khóa cửa Euchner

Repeat accuracy R
according to EN 60947-5-2	<= 10

Fuse
external (operating voltage)	0.25 ... 8 A
rated conditional short-circuit current	100 A
Rated insulation voltage Ui	300 V
Rated impulse withstand voltage Uimp	1.5 kV
Operating voltage DC
UB	24 V DC -15% ... +15% regulated, residual ripple<5%, PELV
Turn-on time
Safety outputs	max. 100 ms
EMC protection requirements	Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3	max. 125 ms
Safety class	III
Current consumption	40 mA
Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output OD/C
Output type	p-switching, short circuit-proof
Output voltage	UB-1.5 ... UB V DC
Switching current	1 ... 50 mA
	Safety outputs FO1A / FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
HIGH U(FO1A) / U(FO1B)	UB-1.5V ... UB V DC
Discrepancy time	max. 10 ms
Utilization category
DC-13	24 V 150 mA
Off-state current Ir	max. 0.25 mA
Switching current	1 ... 150 mA
Test pulse duration	0.3 ms
Test pulse interval	ca 100 ms

Dimensions	40 x 26.5 x 18
Connection type	M12 plug connector, 5-pin
Tightening torque	max. 0.8 Nm
Ready delay	5 s
Operating altitude	max. 4 000 m
Installation orientation	any
Switching frequency	max. 1 Hz
Mounting distance
between 2 switches or 2 actuators	min. 50 mm
Mounting type	Surface mounting on metal
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP65/IP67/IP69/IP69K
Ambient temperature
at UB = 24 V DC	-25 ... +55 °C
Material
Housing	Plastic, PBT-PC-GF30

	PL	Maximum SIL	PFHD	Category	Mission time
Monitoring of the guard position	PL e	3	6x10-10	4	20 y

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures
Additional feature	Caps included

Switching hysteresis

1 ... 2 mm

Switch-on distance
Installation position C	8 mm
Installation position A	16 mm
Installation position B	11 mm
Installation position D	7 mm
Secured switch-off distance sar
in x direction/installation position C	max. 21 mm
in x direction/installation position A	max. 24 mm
Secured switching distance sao
in x direction/installation position C	min. 6 mm
in x direction/installation position A	min. 13 mm

Switch-on distance
Installation position A + B	13 mm
Installation position C + D	7 mm
Secured switch-off distance sar
in x direction/installation position A + B	max. 20 mm
in x direction/installation position C + D	max. 17 mm
Secured switching distance sao
in x direction/installation position A	min. 10 mm
in x direction/installation position B	min. 9 mm
in x direction/installation position D	min. 2 mm
in x direction/installation position C	min. 3 mm