Liên hệ tư vấn

0374830598

MGBS-P-L1H-AR-U-L-SH-161562 Khóa an toàn Euchner

Installation orientation	Door hinge DIN left
Degree of protection	IP65
Ambient temperature	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Product version number	V1.0.0
Additional feature	with automatic lockout mechanism

Repeat accuracy R
according to EN 60947-5-2	10 %

Item	Color	Extras	Version	Switching element	Note slide-in label	Slide-in label	Number	Designation1	LED
2			Illuminated pushbutton	1NO
3			Illuminated pushbutton	1NO

Fuse
external (solenoid operating voltage IMP)	0.5 ... 8 A
external (operating voltage UB)	0.25 ... 8 A
Power consumption	6 W
Rated insulation voltage Ui	50 V
Rated impulse withstand voltage Uimp	0.5 kV
Operating voltage DC
UUB	24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV
EMC protection requirements	Acc. to EN IEC 60947-5-3
Utilization category
DC-13	24 V 150 mA
Solenoid operating voltage DC
UIMP	24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple<5%, PELV
Solenoid duty cycle	100 %
Risk time according to EN 60947-5-3	max. 260 ms
Risk time according to EN 60947-5-3, extension for each additional device	max. 5 ms
Switching load
according to UL	24V DC, Class 2
Safety class
EN IEC 61140	III
Current consumption
IUB	40 mA
IIMP	400 mA
Test pulse duration	max. 1.0 ms
Test pulse interval	min. 140 ms
Degree of contamination (external, according to EN 60947-1)	3
	Controls and indicators
Operating voltage	UB V
Operating current	1 ... 50 mA
Power supply
LED	24 V
Current consumption
LED	10 mA
	Monitoring output OD, OI, OL
Output type	p-switching, short circuit-proof
Output voltage	0.8xUB ... UB V DC
Switching current	1 ... 50 mA
	Safety outputs FO1A / FO1B
Output type	2 semiconductor outputs, p-switching, short circuit-proof
Output voltage
HIGH U(FO1A) / U(FO1B)	UB-1.5 ... UB V DC
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
Discrepancy time
both safety outputs	max. 10 ms Acc. to EN IEC 60947-5-3
Turn-on time	max. 400 ms
Off-state current Ir	max. 0.25 mA
Switching current
per safety output FO1A / FO1B	1 ... 150 mA

Approach speed	max. 20 m/min
Connection type	1 plug connector M23, 19-pin, RC18
Extraction force	20 N
Ready delay	8 s
Actuating force	10 N
Installation orientation	Door hinge DIN left
Switching frequency	max. 0.5 Hz
Mechanical life	1 x 10⁶
Overtravel	5 mm
Retention force	20 N
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP65
Ambient temperature
at UB = 24 V DC	-20 ... +55 °C
Material
Switch bracket	Die-cast zinc
Safety switch housing	Reinforced thermoplastic
Locking force Fmax	3900 N
Locking force FZh	3000 N
Guard locking principle	Closed-circuit current principle

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures; see operating instructions
Additional feature	incl. lens set, ID no. 120344